578332
59
Zoom out
Zoom in
Previous page
1/143
Next page
Archer C9
AC1900 Wireless Dual Band Gigabit Router
TP-LINK_XXXX_5G. This value is case-sensitive. For example, TEST is NOT the same as
test.
Region - The geographic region where the router is being used. This field specifies the
region where the wireless function of the router can be used. It might be illegal to use the
wireless features of the router in some parts of the world.
If your country or region is not
listed, please contact your local government agency for assistance.
Mode - Select the desired mode.
11ac only - Select if you are using 802.11ac wireless clients.
11a/n/ac mixed - Select if you are using a mix of 802.11a, 11n, and 11ac wireless
clients. This is the default mode, where all of 802.11a, 802.11n, and 802.11ac wireless
stations can connect to the router.
Channel Width - Select the channel width from the drop-down list, including Auto, 20MHz,
40MHz, 80MHz
. The default setting is Auto.
Channel - This field determines which operating frequency will be used. The default channel
is set to Auto, so the router will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
Enable SSID Broadcast - When wireless clients survey the local area for wireless networks
to associate with, they will detect the SSID broadcast by the router. If you select the Enable
SSID Broadcast checkbox, the Wireless router will broadcast its name (SSID) on the air.
Enable WDS Bridging - Check this box to enable WDS. With this function, the router can
bridge two or more WLANs. If this checkbox is selected, you will have to set the following
parameters as shown in Figure 5-27. Make sure the following settings are correct.
Figure 5-27 WDS Settings
SSID (to be bridged) - The SSID of the AP your router is going to connect to as a client.
You can also use the search function to select the SSID to join.
- 48 -
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK Archer C9 AC1900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK Archer C9 AC1900 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK Archer C9 AC1900

TP-LINK Archer C9 AC1900 Installation Guide - English - 2 pages

TP-LINK Archer C9 AC1900 Quick start guide - All languages - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info