772802
51
Zoom out
Zoom in
Previous page
1/83
Next page
Destination IP: The destination IP address that you want to assign to a static route. This IP address
cannot be on the same subnet with the WAN IP or LAN IP of the router. In the example, the IP
address of the company network is the destination IP address, so here enters 172.30.30.1.
Subnet Mask: Determines the destination network with the destination IP address. If the destination
is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding
network IP. In the example, the destination network is a single IP, so here enters 255.255.255.255.
Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address
must be on the same subnet with the router’s IP which sends out the data. In the example, the
data packets will be sent to the LAN port of Router 2 and then to the Server, so the default gateway
should be 192.168.0.2.
Interface: Determined by the port (WAN/LAN) that sends out the data packets. In the example, the
data is sent to the gateway through the LAN port, so LAN should be selected.
Status: Determines the status of the entry. In the example, Enabled should be selected.
6. Click OK to save the settings.
7. Check the System Routing Table below. If you can find the entry you set, the static routing is set
successfully.
Open a web browser on your PC. Enter the company server’s IP address to visit the company network.
11. 6. Specify Wireless Settings
The router’s wireless network names (SSIDs) and passwords, and security options are preset in the factory. The preset SSIDs
and passwords can be found on the product label. You can customize the wireless settings according to your needs.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
Done!
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK Archer C3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK Archer C3000 in the language / languages: English as an attachment in your email.

The manual is 6.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK Archer C3000

TP-LINK Archer C3000 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info