728861
6
Zoom out
Zoom in
Previous page
1/8
Next page
9. TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
The following are not defects.
10. SPECIFICATIONS
NOTE: Dehumidifying capacity will vary according to temperature
and humidity of the room.
CONTAINS FLUORINATED GREENHOUSE GASES COVERED BY
THE KYOTO PROTOCOL.
HERMETICALLY SEALED SYSTEM
GWP information (according to (EC) No 842 / 2006
3
ENGLISH
SYMPTOM
Unit does
not work.
FULL lamp is
ON even the
water tank is
empty.
The product
does not de-
humidify.
Operation
sound is
loud.
The drain
water is
leaked.
CAUSE
- Power cut.
- The plug has been
plugged improperly.
- The FULL LAMP is
ON. Tank is full.
- The DEFROST LAMP
is ON.
- The tank is not insert-
ed properly.
- The float of tank is not
placed properly.
- The filter is dusty or air
outlet is clogged.
- Surrounding tempera-
ture and humidity are
low.
- The filter is dusty
- The unit operates on
the rough place.
- The unit leans.
- Move the unit with wa-
ter in the tank.
- The float is not in the
proper position.
- Take the water tank
out soon after stop-
ping the operation.
SOLUTION
- Wait for power to be
supplied again.
-Plug in again.
- Remove the drain wa-
ter from the drain
tank.
- When the room tem-
perature is under
12˚C, the heat ex-
changer is sometimes
frosted. And the unit
starts defrosting mode
automatically. During
this mode, DEFROST
LAMP is ON, and wait
for a while.
- Take the water tank
out once, and push it
back to the proper po-
sition.
- Place the float in the
proper position.
- Clean the filter and air
outlet.
- As the temperature
and humidity are low-
er, the amount of de-
humidification is also
lower.
- Clean the filter.
- Operate at the flat
place.
- Operate at the flat
place.
- Remove the water at
first, and then you can
move the product.
- Place the float proper-
ly.
- The product keeps
draining even the unit
stops operating. Wait
for approx. 5mins.
A hissing noise or hollow
sound:
A squeaking noise:
Odor:
The unit does not start nor
change operation mode
immediately:
e
This sound is generated from the
refrigerant flowing within pipes.
e
This noise is generated from the
unit when it is expands or con-
tracts with temperature changes.
e
Such odor as tobacco, cosmet-
ics, or foods may accumulate in
the unit.
e
To prevent overloading the com-
pressor motor, the unit will be
stopped for more than 3 minutes.
MODEL TD-C100
DEHUMIDIFYING CAPACITY 10 L/D (30˚C, 80%RH)
POWER SOURCE Single Phase 220-240V, 50Hz
POWER CONSUMPTION 205 W
OPERATING CURRENT 0.8A
AIR FLOW (MAX.) 45 m
3
/h
OPERATING TEMP. RANGE 5˚C ~ 32˚C
DIMENSIONS (WxHxD) 230 x 386 x 230 mm
WEIGHT 8.5kg
COMPRESSOR ROTARY
REFRIGERANT R-134A / 110g
FUSE 3.15A/250V (Type: 3N, 3K, 30T)
GWP 1300 (R134a)
WIRING DIAGRAM
250V 3.15A
TD-C100.qxd 14.10.9 13:01 ページ 3
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyotomi TD-C100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyotomi TD-C100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info