650615
6
Zoom out
Zoom in
Previous page
1/15
Next page
5
SET CLOCK
It is only possible to set the correct time, when the heater is
connected to the mains and not burning.
1. Use the Adjustment Keys ( hour / min.) to set the time.
2. To set the time, press “hour” and “min.”
set buttons. Individual motions will
increase the time by one unit; holding
continuously will raise either the “hour” or
“min.” rapidly. After approximately 10
seconds the blinking will stop and the
setting will be locked. 5 Minutes after
switching off the heater, the information on the display will disappear and the heater
will automatically switch into the stand-by position.
1. Just press the button to ignite the
heater. The button will start blinking,
indicating that the ignition procedure has
started. This will take a short while.
2. After this time heater will automatically
ignite and The button will cease its flashing. The Operation Lamp will remain alight
so long as heater is burning.
NOTE
:
If using your heater for the first time, or after long term storage, ignition may
not take place on the first try. Press the button again.
NOTE
:
Fuel pump may produce an audible operating noise at ignition. This is only
temporary.
IGNITION
1
2
OPERATION
CAUTION
:
Always make sure that there is sufficient ventilation.
LC-41 10.7.21 2:48 PM ページ 5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyotomi LC-41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyotomi LC-41 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info