528286
49
Zoom out
Zoom in
Previous page
1/52
Next page
SP100 Series
Read this manual carefully before use and always follow the
instructions.
Keep the manual in a convenient place for easy reference.
If you give the sewing machine to someone else, also give
them this instruction manual.
HOME-USE SEWING MACHINE
INSTRUCTION
MANUAL
1
2
3
4
5
2
Contents
Before use (Be sure to read this section before use)
Important safety instructions
............................................. 3
How to change the power plug
......................................... 5
Part names
....................................................................... 6
Part names and their functions
......................................... 8
Quick adviser
.................................................................. 10
How to operate foot controller
......................................... 11
Sewing preparations
Connecting the power
..................................................... 12
Winding the lower thread
................................................ 14
Threading the lower thread
............................................. 16
Threading the upper thread
............................................ 18
Using the needle threader
.............................................. 20
Pulling up the lower thread
............................................. 22
Application of each stitch pattern
.................................... 23
Changing the presser foot
.............................................. 24
Changing the needle
....................................................... 26
Relationship between the needle, thread and fabric, and
adjusting the thread tension............................................ 27
Sewing
Straight stitching and reverse sewing
............................. 28
Zigzag sewing
................................................................. 32
Adjusting thread tension
................................................. 33
Buttonhole sewing
.......................................................... 34
Overcasting
..................................................................... 37
Zipper insertion
............................................................... 38
Blind hem stitching
.......................................................... 40
Maintenance
Feed dog and hook maintenance
................................... 42
Changing light bulb
......................................................... 46
Servicing double-insulated products (230V-240V)
.......... 47
Notice about the incandescent lamp
............................... 47
Troubleshooting
.............................................................. 47
Others
Recycling
........................................................................ 50
Specications
.................................................................. 51
1
7
Before use (Be sure to read this section before use)
Thread winder
guide
Handwheel
Main power
switch
Terminal box
Thread cutter
Buttonhole
adjustment screw
Presser foot lever
Hollow for carrying
(Insert your hand into the hollow
when carrying sewing machine)
Thread winding
spindle
Foot controller
Model XXX15C Model XXX15D/SuperJ15
8
Part names and their functions
The various parts of the sewing machine have the functions described below.
Extension table
(Accessory Box)
Presser foot lever
When sewing, lower the presser foot lever to lower
the presser foot. (Position
1
)
When inserting fabric, lift up the presser foot lever to
raise the presser foot. (Position
2
)
The presser foot can be raised even higher by raising
the presser foot lever to position
3
. Since the
presser foot lever does not remain in this position,
hold it in place when inserting the fabric. This position
is useful when sewing thick fabric.
Pull out the extension
table (accessory box)
in the direction of the
arrow.
1
9
Before use (Be sure to read this section before use)
Reverse sewing lever
Handwheel
Use the handwheel to manually raise and
lower the needle.
Note:
Always turn the handwheel towards
yourself (in the direction of the
arrow).
If the handwheel is turned in the
opposite direction, the thread may
become tangled.
Pattern selection dial
Select the pattern to be
used.
Turn the pattern selection
dial until the desired pattern
aligns with the mark above
the dial.
Press down the reverse lever, when sewing in
reverse.
Remove your nger from the reverse sewing
lever to return to forward direction sewing.
2
15
Sewing preparations
Pull the thread from the thread
spool, and then hold it with
one hand while passing it
around the thread guide with
the other hand, as shown.
Pass the thread end through
the hole in the bobbin as
shown.
Place the bobbin on the
thread winding spindle so the
groove aligns with the shaft
projection.
7
While holding the thread end,
1
begin pressing on the foot
controller with your foot.
After the thread has been
2
wound around the bobbin
about 10 times, release
the foot controller to stop
winding.
Spool pin (
2
)
Thread winding spindle
(
7
8
10
)
Foot controller
(
7
9
)
Main power switch
(
1
6
)
Thread guide
Thread
Hole
Thread
winding
spindle
Groove
Bobbin
Shaft
projection
Slide the
thread winding
spindle in the
direction of
the arrow until
it snaps into
place.
6
Turn on the machine.
Main power switch
Foot controller
Hold in place
with your finger.
While the bobbin is being wound, do not touch the thread winding
spindle or the handwheel.
Doing so could cause an injury.
Caution
49
4
Maintenance
Trouble Cause Countermeasure Page
The fabric
wrinkles /
puckers
The tension of the upper
thread is too tight
Adjust the thread tension 33
The machine is incorrectly
threaded
Rethread the machine 16-19
Needle is too thick for the
fabric
Use a finer needle to suit the
fabric
27
The needle is burred Insert a new needle 26
Stretch fabric is being sewn Use the ball point needle 27
Lower thread
showing on
the top of the
fabric
Incorrect bobbin threading Rethread the bobbin correctly 16, 17
The tension of the upper
thread is too tight
Adjust the thread tension 33
Incorrect plastic bobbin used
or a metal bobbin is used
Only use the designated
TOYOTA bobbin
14
Upper thread
showing on
the under
side of the
fabric
The tension of the upper
thread is too loose
Adjust the thread tension 33
Incorrect upper threading
(not threaded through the
thread guide)
Rethread the upper thread
correctly
18, 19
The needle
cannot be
threaded with
the needle
threader
The needle position is too
low
Turn the handwheel so that the
line is at the top
9
Needle no. 9/65 is being
used
Use needle sizes 11/75 to
16/100
27
Needle incorrectly inserted Insert the needle correctly 26
The needle is bent Use a straight needle 26
Threading of the needle bar
thread guide incorrect
Rethread the needle bar thread
guide correctly
18
If the above treatments do not solve the
problem, contact the service center as
described in your warranty.
When calling for service, please note the
MODEL and SERIES that are inscribed
on the back of your sewing machine.
SP100 SERIES / SERIE
max 15W
Total 65W
MODEL / MODELE
220-240V
50Hz
Manufacturer/ : ZHEJIANG AISIN ELITE
Fabricant MACHINERY & ELECTRIC
CO., LTD.P.R.C.
Importer/ : EUROPE S. A.
Importateur
MADE IN P. R. C. / FABRIQUE A P.R.C.
Designed and engineered by
AISIN SEIKI JAPAN
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota SUPERJEANS 15WE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota SUPERJEANS 15WE in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota SUPERJEANS 15WE

Toyota SUPERJEANS 15WE User Manual - German - 52 pages

Toyota SUPERJEANS 15WE User Manual - Dutch - 52 pages

Toyota SUPERJEANS 15WE User Manual - French - 52 pages

Toyota SUPERJEANS 15WE User Manual - Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info