458429

Toyota SL3487 (SL1T-X serie) Manual

41
Zoom out
Zoom in
Previous page
1/70
Next page
How to Adjust Stitch Length
The machine is pre-set to a 2.5mm
stitch length for regular seaming
and overedging. You may adjust the
stitch length from 1mm (Narrow rolled
hemming) to 5mm by one-touch of the
stitch length adjustment lever.
❈ For normal overedging set the stitch
length from 2.5mm to 5mm. A stitch
length less than 2.5mm is used only
for rolled hemming.
Page 37
English Español
Section
3
Como Ajustar El Largo De La Puntada
La máquina está fijada para una
puntada de 2.5 mm de largo para
costura corriente y orillado. Es posible
ajustar el largo de la puntada desde
1 mm, (orillado angosto), a 5 mm,
por medio de un toque a la palanca
ajustadora de largo.
❈ Para orillado normal ajuste el largo de
puntada de 2.5 a 5 mm. Una puntada
de menos de 2.5 mm es utilizada
solamente para orillado angosto
doble.
Sewing for Curved Seams
For a neat and clean finish of curved
seams:
For inside curves, guide the fabric
gently with the trimming line of the fabric
under the right front of the presser foot,
applying pressure to the fabric with your
left hand, at the same time, apply a little
pressure in the opposite direction with
your right hand as shown.
Costuras Curvas
Para obtener una terminación prolija en
costuras curvas:
Para curvas interiores guíe la tela
cuidadosamente con la línea de corte de
la tela por delante y hacia la derecha del
prensatelas presionando la tela con su
mano izquierda y presionando, al mismo
tiempo y en dirección opuesta con su
mano derecha, según lo ilustrado.
Para curvas externas, aplique la presión
en dirección opuesta a lo anterior.
For outside curves, apply pressure in the
opposite directions of the above.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota SL3487 (SL1T-X serie) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota SL3487 (SL1T-X serie) in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info