458429
27
Zoom out
Zoom in
Previous page
1/70
Next page
FOUR THREAD OVEREDGING
STITCH USING 2 NEEDLES
Before Sewing
After threading is completed, and when
the threads are not wound around the
stitch finger, gently draw out the four
threads under and behind the presser
foot, and turn the handwheel towards
you by hand two or three times to make
the thread wind on to the needle plate.
Page 23
English Español
Section
3
PUNTO PARA ORILLADO DE 4
HEBRAS UTILIZANDO DOS AGUJAS
Antes De Coser
Después de estar los hilos enhebrados
y cuando los hilos no están enrollados
sobre la placaagujas, saque
suavemente los hilos por debajo y hacia
atrás del prensatelas, girando el volante
hacia Ud. dos o tres veces, para así
enrollar el hilo sobre la placa agujas.
Presser Foot Lifter
For setting average material, there is no
need to lower the presser foot lifter.
When beginning to sew, push the
material just in front of the presser foot
and it will be fed through. For the thick
material, lower the presser foot lifter,
place the material under the presser
foot, then raise the presser foot lifter.
Palanca Alzadora
Para coser material corriente no es
necesario bajar la palanca alzadora.
Al empezar la costura, empuje el
material frente al prensatelas y éste será
tomado por los dientes. Para materiales
gruesos, baje la palanca alzadora,
ubique el material bajo el prensatelas,
enseguida suba la palanca alzadora.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota SL3487 (SL1T-X serie) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota SL3487 (SL1T-X serie) in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info