Manual Toyota QUILT 226 (page 65 of 77) (English, Dutch, French, Italian)

603738

65

Zoom out

Zoom in

Previous page

1/77

Next page

54

a

English Français

Nederlands Italiano

Lower thread tension adjustment

When the bobbin case tension is correctly

adjusted, it is easy to balance the upper thread

tension.

Adjusting bobbin case tension.

Needle in the raised position.

1. Turn screw

aa

(on the bobbin case) for tension

adjustment. (fig E)

Turn the screw to the left to loosen tension.

Turn the screw to the right to tighten tension.

2. Replace the shuttle hook.

Lay the machine on its back to make it easier.

(fig F)

3. Replace shuttle hook cover. (fig G)

4. Push latches towards inside.

5. Close shuttle cover.

Réglage de la tension du fil inférieur

Lorsque la tension de la canette est correctement

réglée, il est facile d’équilibrer la tension du fil

supérieur.

Réglage de la tension de la canette.

L’aiguille en position haute.

1. Tourner la vis

aa

(sur la canette) pour régler la

tension (fig. E)

Tourner la vis vers la gauche pour desserrer la

tension

Tourner la vis vers la droite pour augmenter la

tension

2. Replacement de l’étrie.

Mettre la machine sur le dos pour effectuer plus

facilement cette opération. (fig. F)

3. Replacement du couvercle de l’étrier. (fig. G)

4. Pousser les loquets vers l’intérieur.

5. Fermer le cache-navette.

Regolazione della tensione inferiore

Quando la tensione della capsula è corretta, è più

facile regolare la tensione del filo

Regolazione della tensione della capsula

Ago in posizione alta

1. Girate la vite

aa

sulla capsula servendovi di un

piccolo cacciavite (fig. E)

A sinistra per allentare la tensione

A destra per stringere la tensione

2. Riposizionate il crochet

Appoggiare la macchina sul dorso per facilitare

l’operazione (fig. F)

3. Reinserite l’anello portacrochet (fig. G)

4. Chiudete le alette verso l’interno

5. Chiudete lo sportellino

Onderdraad spannings afstelling

Als de spoelhuis spanning goed is afgesteld, is het

makkelijk om de bovenspanning in de juiste balans

te brengen.

Afstelling van de spoelhuis spanning.

Zet de naald in de hoogste stand.

1. Draai aan schroef

aa

(op de grijper) voor de

afstelling van de spanning. (fig E)

Draai de schroef naar links om de spanning te

verlagen.

Draai de schroef naar rechts om de spanning te

verhogen.

2. Plaats het grijper terug.

Leg de machine op de achterkant om dit te

vergemakkelijken. (fig F)

3. Plaats de spoelhuis dekring terug. (fig G)

4. Duw de hendeltjes naar de binnenkant en

plaats het spoelhuis terug.

5. Sluit de spoelhuisklep.

FE G

1

Can you purchase a ruler foot for this machine and does the machine have a long or short shank Submitted on 7-5-2020 at 03:20
Reply Report abuse
My stitch selector will only now do zigzag no matter what I do. It will not click and just goes round. I have taken the selector case off and have noticed a crack in the case shaft/shank. Is it possible to get a replacement? Submitted on 29-7-2018 at 17:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Toyota QUILT 226 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toyota QUILT 226 in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 2,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota QUILT 226

Toyota QUILT 226 User Manual - German - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info