Manual Toyota QUILT 226 (page 62 of 77) (English, Dutch, French, Italian)

603738

Zoom out

Zoom in

1/77

➁

➀

English Français

Nederlands Italiano

Your machine requires cleaning and oiling for good

sewing performance.

A machine which is used for a few hours a day

needs to be cleaned and oiled once a month.

Caution!

Disconnect power supply before carrying out

maintenance. Needle in the raised position.

Cleaning

1. Remove foot and needle. Remove needle plate

with needle plate screw driver. (fig A)

2. Brush off all dust and lint on feed teeth with a

cleaning brush. (fig B)

3. Open shuttle cover and turn latches of shuttle

➀

outwards. (fig C)

4. Remove shuttle hook cover. Remove shuttle hook.

(fig D)

5. Clean shuttle race

➁ with a cleaning brush and

soft cloth. (fig E)

6. After maintenance, replace needle plate, needle

and presser foot.

Votre machine nécessite d’être nettoyer et huilée

pour une bonne performance de couture.

Une machine qui est utilisée seulement quelques

heures a besoin d’être nettoyée et huilée une fois

par mois.

Attention!

Débrancher la machine avant de commencer la

maintenance. L’aiguille en position haute.

Nettoyage

1. Enlever le pied-de-biche et l’aiguille. Enlever la

plaque-aiguille. (fig. A)

2. Brosser tous les dépôts et la griffe d’entraînement

à l’aide de la brosse de nettoyage. (fig. B)

3. Enlever le cache-navette et repousser les loquets

➀ vers l’extérieur. (fig. C)

4. Enlever l’étrier de la coursière. Enlever le crochet de

la navette. (fig. D)

5. Nettoyer l’étrier avec une brosse de nettoyage et

un chiffon doux. (fig. E)

6. Après intervention, remettre en place la plaque-

aiguille, l’aiguille et le pied presseur.

Uw machine moet schoongehouden en geolied

worden om goede prestaties te kunnen bieden.

Een machine die enkele uren per dag wordt gebruikt

moet eens per maand schoongemaakt en geolied

worden.

Waarschuwing!

Haal de stekker uit het stopcontact voordat u met

onderhoud begint. Zet de naald in de hoogste stand.

Schoonmaken

1. Verwijder de voet en de naald. Verwijder de

naaldplaat. (fig A)

2. Borstel alle stof en pluisjes op de transporteur

weg met een schoonmaak borsteltje. (fig B)

3. Open de spoelhuisklep en draai de hendeltjes van

het grijpersysteem

➀ naar buiten. (fig C)

4. Verwijder de grijper dekring. Verwijder het

spoelhuis. (fig D)

5. Maak de grijperbaan

➁ schoon met een

schoonmaak borsteltje en zachte doek. (fig E)

6. Na het onderhoud kunt U de naaldplaat, naald en

de persvoet terugplaatsen.

La vostra macchina richiede una manutenzione ed

una lubrificazione regolare per poter funzionare nel

migliore dei modi.

Una macchina che viene utilizzata per alcune ore

ogni giorno deve essere pulita e lubrificata una volta

al mese

Attenzione!

Togliete la spina dalla presa di corrente prima di

qualsiasi operazione di manutenzione. Ago in

posizione alta

Pulizia

1. Togliete il piedino, l’ago e la placca ago (fig. A)

2. Con un apposito pennello togliete tutti i depositi e

pulite il trasportatore (fig. B)

3. Spostate le alette verso l’esterno (fig. C)

4. Togliete l’anello ferma crochet e il crochet (fig. D)

5. Pulitelo con un apposito pennello od un panno

morbido (fig. E)

6. Dopo la manutenzione, riposizionare la placca

ago, l’ago e il piedino.

BA C

Can you purchase a ruler foot for this machine and does the machine have a long or short shank Submitted on 7-5-2020 at 03:20
Reply Report abuse
My stitch selector will only now do zigzag no matter what I do. It will not click and just goes round. I have taken the selector case off and have noticed a crack in the case shaft/shank. Is it possible to get a replacement? Submitted on 29-7-2018 at 17:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toyota QUILT 226 in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 2,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota QUILT 226

Toyota QUILT 226 User Manual - German - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toyota QUILT 226 Manual

Product: