603737
96
Zoom out
Zoom in
Previous page
1/106
Next page
96
When an error code appears
If an incorrect operation was performed, an error code between F1 and F9 appears in the LED display. Try again
with the correct procedure.
LED display Cause Countermeasure
F1
This appears and the sewing machine
stops when the motor is being overloaded,
for example, when the fabric is too thick.
Try again with fabric of a suitable
thickness.
F2
This appears when the sewing machine is
started with the start/stop button or the foot
controller while the presser foot is raised.
Lower the presser foot lever.
F3
This appears when the buttonhole lever is
not lowered to the buttonhole foot even
though a buttonhole stitch is selected.
Lower the buttonhole lever to the
buttonhole foot.
F4
This appears when a stitch other than a
buttonhole stitch is selected and the
buttonhole lever has been lowered and the
buttonhole foot is still attached.
Replace the presser foot to one suitable for
the stitch, and then raise the buttonhole
lever.
F5
This appears and the sewing machine
suddenly stops when the foot controller
connector is plugged into the jack while the
sewing machine is running.
With the sewing machine stopped, plug the
foot controller connector into the jack.
F6
This appears and the sewing machine
suddenly stops when the foot controller
connector is unplugged from the jack while
the sewing machine is running.
With the sewing machine stopped, unplug
the foot controller connector from the jack.
F7
This appears and the sewing machine
suddenly stops when the thread winding
spindle is slid to the right while the sewing
machine is running.
Return the thread winding spindle to the
standby position (left).
F8
This appears and the sewing machine
suddenly stops when the thread winding
spindle is slid to the left while the bobbin is
being wound.
Move the thread winding spindle while the
sewing machine is stopped.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota OEKAKI50R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota OEKAKI50R in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota OEKAKI50R

Toyota OEKAKI50R User Manual - German - 106 pages

Toyota OEKAKI50R User Manual - Dutch - 106 pages

Toyota OEKAKI50R User Manual - French - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info