603737
73
Zoom out
Zoom in
Previous page
1/106
Next page
73
EN
Relationship between the needle, thread and fabric in OEKAKI
mode, and adjusting the thread tension
The quality of the sewing finish will improve if the needle and thread are selected to match the type of fabric used.
Follow the recommendations in the table below.
When purchasing any needles not included as accessories, check that they are specified as home-use
sewing machine needles.
Use the same type of threads for the upper and lower threads.
The larger the needle number, the thicker the needle. The larger the thread number, the thinner the thread.
It may be necessary to adjust the upper thread tension according to the fabric, thread and needle
combination. (Refer to page 88.)
<Selecting a needle suitable for the thread>
Pass the thread to be used through the eye of the needle, and then hold both
ends of the thread to give the thread slack so that the needle slides along it, as
shown.
If the needle does not catch, the needle and thread are a good combination.
Since a needle that is too thick for the thickness of the thread will result in poor-
quality stitching, select the needle with the smallest number possible, which will
not catch on the thread.
If the needle frequently catches on the thread or does not slide along it, stitching
of poor quality will be produced. In this case, select a needle with a different
number or a different type of thread.
Thin fabrics Normal fabrics
Relationship between the needle,
thread and fabric
Needle
No. 11/75 No. 14/90
In OEKAKI mode, do not use needle no. 18/110 or the ball point needle (knit needle).
Refer to “Selecting a needle suitable for the thread”, and then select a needle and thread.
Thread
Fabric
Be sure to attach stabilizer to medium to medium-thick fabrics.
Check that the stabilizer is compatible with the fabric. Sew trial stitches before sewing in
OEKAKI (free-motion embroidering) mode.
Reference
thread tension
Upper
thread
tension
dial
Set the upper thread tension dial to a setting between “-1” and “-3”, making sure that the
lower thread is not visible from the top of the fabric.
-1 – -3
Tip
-
2
-
1
-
3
Thread
Needle
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota OEKAKI50R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota OEKAKI50R in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota OEKAKI50R

Toyota OEKAKI50R User Manual - German - 106 pages

Toyota OEKAKI50R User Manual - Dutch - 106 pages

Toyota OEKAKI50R User Manual - French - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info