603769
40
Zoom out
Zoom in
Previous page
1/84
Next page
29
English Français
3 ~ 5 mm (0.2”)
25
6
a
b
c
A
DCB
HOW TO USE BUILT IN STITCHES
Blind hem stitch
1. Be sure that the declutch knob in the handwheel is
into the ( ) direction.
2. Set pattern selection dial, stitch length dial and
zigzag width control dial as... (fig A)
3. Fold the material as shown in (fig B). Place it under
the presser foot.
For neater finish, it is preferable to pin and press
the hem before sewing.
4. Sew on the fold, so that straight stitches are made
on the hem edge, and the zigzag just catches only
one or two threads of fold. (fig C)
(fig D) a : Correct seam
b
: Needle catching edge of fold too much.
c:
Needle is not catching edge of fold at all.
Use zigzag sewing foot or option foot (blind
stitch foot).
Overcasting
For light-weight material:
Overcasting prevents edge of fabric from fraying.
1. Be sure that the declutch knob in the handwheel is
into the ( ) direction.
2. Set pattern selection dial, stitch length dial and
zigzag width control dial as... (fig E)
3. Set the seam allowance under the presser foot with
the edge of fabric in the line with side of the presser
foot. (fig F)
NOTE
For thick fabric (particularly denim), use wide zigzag
stitch, for light fabric, use narrow zigzag stitch.
Use zigzag sewing foot or option foot
(overcasting foot).
MODE D’UTILISATION DES POINTS
PRE-REGLES
Point de couture invisible
1. Vérifier que le bouton de débrayage sur le volant est
enclenché vers ( ).
2. Régler le
cadran de sélection de point
, le cadran de
sélection de longueur de point
et le
cadran de
réglage de la largeur du zigzag
comme indiqué (fig.
A
)
3. Pliez le tissu comme indiqué (fig. B). Le placer sous le
pied-de-biche.
Pour fignoler à la fin, il est conseillé de piquer et
presser l’ourlet avant de coudre.
4. Coudre sur la plissure, de manière à ce que les points
droits soient faits sur le bord de l’ourlet, et si c’est un
zigzag, le zigzag doit attraper u
n ou deux fils de la
plissure. (fig. C)
(fig. D) a : une couture correcte
b
: l’aiguille attrapant trop le bord du pli.
c : l’aiguille n’attrapant absolument pas le
bord du pli.
Utiliser le pied zigzag ou le pied en option (pied-
de-biche pour couture invisible).
Surfilage
Pour des tissus légers:
Surfiler empêche les bords des tissus de s’effilocher.
1. Vérifier que le bouton de débrayage sur le volant est
enclenché vers ( ).
2. Régler le
cadran de sélection de point
, le cadran de
sélection de longueur de point
et le
cadran de
réglage de la largeur du zigzag
comme indiqué (fig.
E
)
3. Coudre soigneusement de façon à ce que tous les
points piqués sur le bord droit soient alignés le long du
bord du tissu. (fig. F)
NOTE
Pour des tissus épais (comme le jean), utilisez des
zigzag larges, pour des tissus légers, utilisez des
zigzags étroits.
Utiliser le pied zigzag ou le pied en option (pied-
de-biche pour faufilage).
F
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota FSM325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota FSM325 in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota FSM325

Toyota FSM325 User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info