603721
9
Zoom out
Zoom in
Previous page
1/55
Next page
1
Type designation
RS series has several types.
The types are shown on the model label as follows:
MODEL/MODELE(MODEL NAME) SERIES/SERIE
RS SERIES/SERIE
RS2000 SERIES/SERIE
RS2000A SERIES/SERIE
RS2000B SERIES/SERIE
Model label
When calling for service, please note the MODEL and SERIES numbers that are inscribed on the
back of your sewing machine.
MODEL number SERIES number
2
CONTENTS
I. Before use .............................................................................................. 3
1. Important safety instructions.......................................................................... 3
2. How to change the power plug ...................................................................... 5
3. Part names .................................................................................................... 6
II. Sewing preparations ............................................................................ 10
1. Connecting the power.................................................................................. 10
2. Taking out the bobbin .................................................................................. 12
3. Winding the lower thread............................................................................. 13
4. Threading the lower thread.......................................................................... 15
5. Threading the upper thread ......................................................................... 16
6. Pulling up the lower thread .......................................................................... 18
7. Main stitch pattern uses............................................................................... 19
8. Application of each stitch pattern................................................................. 20
9. Changing the presser foot ........................................................................... 21
10. Changing the needle ................................................................................... 23
11. Relationship between the needle, thread and fabric, and adjusting
the sewing machine ..................................................................................... 24
III. Sewing ................................................................................................ 25
1. Straight stitching and reverse sewing.......................................................... 25
2. Zigzag sewing.............................................................................................. 29
3. Adjusting thread tension .............................................................................. 30
4. Overcasting ................................................................................................. 31
5. Blind hem stitching ...................................................................................... 32
6. Buttonhole ................................................................................................... 34
7. Zipper sewing .............................................................................................. 37
8. Smocking..................................................................................................... 39
9. Embroidery .................................................................................................. 40
IV. Special specifications ......................................................................... 42
1. Using the needle threader ........................................................................... 42
2. Using the presser foot pressure adjuster..................................................... 44
3. Using the drop feed ..................................................................................... 45
V. Maintenance........................................................................................ 46
1. Feed dog and hook maintenance ................................................................ 46
2. Hook installation .......................................................................................... 48
3. Light bulb replacement ................................................................................ 49
4. Troubleshooting........................................................................................... 50
5. Servicing double-insulated products (230 V-240 V) .................................... 51
VI. Others................................................................................................. 52
1. Specifications .............................................................................................. 52
2. Recycling ..................................................................................................... 52
3
Before use
I. Before use
Be sure to read this section before use
1. Important safety instructions
These safety instructions are designed to prevent danger or damage arising from the incorrect
operation of the machine. Read carefully and always follow the instructions.
Explanation of " " and " "
Symbol explanation
An incorrect operation could result in death or serious injury.
An incorrect operation could result in an injury or damage to the machine.
Do not touch
Prohibited actions
Required actions
Remove the power plug from the outlet.
Use an AC 220 to 230 V power source.
Not doing so could cause an electric shock or a fire.
220 to 230 V
Do not damage the power cord, modify it, bend it
excessively, jerk it or twist it.
Doing so could cause an electric shock or a fire.
If the power cord is damaged, it must be replaced by the
manufacturer or its service agent.
Do not operate where aerosol ( spray ) products are being used or where oxygen is
being administered.
Doing so could cause a fire.
Do not use outdoors.
Doing so could cause an electric shock or a fire.
4
Before use
When the machine is not in use it should be stored safely, not on the floor as protruding
parts could cause injury if a person fell on the machine.
Not doing so could cause an injury.
Use with the shuttle cover closed.
Not doing so could cause an injury.
Before replacing the needle or presser foot or when threading the upper or lower thread,
remove the power plug from the outlet.
Not doing so could cause an injury.
Do not look away from the needle while operating the sewing
machine.
If the needle breaks it could cause an injury.
Do not touch moving parts such as the needle, take-up lever or
handwheel.
Doing so could cause an injury.
Children should only use the machine under the supervision of a
parent or guardian.
Otherwise they could injure themselves.
Do not use when young children are near the machine.
They could touch the needle and be injured.
Before leaving the sewing machine after using it, remove the power plug from the outlet.
Not doing so could cause an injury.
Before using the sewing machine make sure that the presser foot holder clamp screw,
needle clamp screw and needle plate screw are firmly tightened, and that the presser
foot is properly set in the presser foot holder.
Not doing so could cause an injury.
Do not perform the following actions.
Doing so could cause an injury.
Sewing without lowering the presser foot.
Sewing while the needle is incorrectly installed.
Using a bent needle.
Sewing while jerking the fabric.
Moving the pattern selection dial while sewing.
Do not operate on an unstable surface such as a sofa or a bed.
If the sewing machine falls down, it could cause an injury or damages to the machine.
Do not drop or insert any foreign objects into any openings such as opening space
when you remove the face cover and / or the outer casing space of bobbin case.
Doing so could cause an injury or damages to the machine.
Do not repair, disassemble or modify except what is mentioned in the instruction
manual.
Doing so could cause an electric shock, a fire or an injury.
5
Before use
2. How to change the power plug
The wires in this mains lead are coloured in accordance with the following code:
BLUE-NEUTRAL
BROWN-LIVE ( OR ACTIVE )
As the colours of the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug - PROCEED AS FOLLOWS:
The earth plug pin in unnecessary. As the machine is designed under double insulation structure,
the earth wire is removed from the machine. The wire coloured BROWN must be connected to the
terminal marked L or A or coloured RED. The wire coloured BLUE must be connected to the terminal
marked N or coloured BLACK. Neither core is to be connected to the earth terminal of a three-pin plug.
UK ONLY IMPORTANT PLEASE READ CAREFULLY
When you change the power plug or cord, do not repair, disassemble or modify
except at the authorised dealeror service centre.
Doing so could cause an electric shock or a fire.
If for any reason the power plug for this product is removed it should be immediately
disposed of safety and not stored anywhere where it could be inadvertently used again.
Doing so could cause an electric shock or a fire.
6
Before use
3. Part names
Some parts may not apply to your sewing machine.
The MODEL and SERIES numbers are located on the model label on the back of the sewing machine.
使使
Front pattern selection dial type
使使
Part name Detail by use
Upper thread tension dial Refer to P.30 [Adjusting thread tension]
Spool pin Refer to P.13 [Winding the lower thread]
Reverse sewing lever Refer to P.26 [ Reverse sewing ]
7
Before use
Part name Detail by use
Declutch knob Refer to P.14[Winding the lower thread] 4)
Buttonhole adjustment screw Refer to P.36 [Adjustment of buttonhole balance]
Presser foot lever Refer to P.16 [Threading the upper thread]
8
Before use
Some parts may not apply to your sewing machine.
The MODEL and SERIES numbers are located on the model label on the back of the sewing machine.
使使
Side pattern selection dial type
使使
Part name Detail by use
Upper thread tension dial Refer to P.30 [Adjusting thread tension]
Spool pin Refer to P.13 [Winding the lower thread]
Reverse sewing lever Refer to P.26 [ Reverse sewing ]
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota FSB16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota FSB16 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota FSB16

Toyota FSB16 User Manual - German - 54 pages

Toyota FSB16 User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info