458396
98
Zoom out
Zoom in
Previous page
1/115
Next page
English
Trouble shooting
Following cases are not failure of the machine.
Check your machine before you call for service.
83
PROBLEM CAUSE SOLUTION
Move the bobbin winder shaft to
the left.
Plug cord into electrical outlet and
machine properly.
Turn the switch ON.
Plug cord into electrical outlet and
machine properly.
Turn the switch ON.
Clean shuttle and feed dog.
Reset needle.
Tighten needle clamp screw.
Adjust thread tension.
Use proper needle.
See page 41 for the thread and
needle that can be used.
Raise the needle to its highest
position.
Reset needle.
Insert new needle.
Bobbin winder shaft is on the
right side.
Not plugged in properly.
Power and light switch is turned
off.
Not plugged in properly.
Power and light switch is turned
off.
Lint stuck in the shuttle.
Lint stuck in the feed dog.
Needle inserted incorrectly.
Needle clamp screw too loose.
Upper thread tension is too tight.
Needle too fine for the fabric or
needle bent.
#65/9 needle is being used.
Needle is not raised to its highest
position.
Needle inserted incorrectly.
Needle bent.
• Machine does not sew
• Sewing advisor LCD does
not display.
• Noisy machine
• Slow speed
• Breaking needle
• Needle threader does not
work.
• Too much thread appears
on the right side of the
fabric
Wrong side
Right side
PAGE
P21
P13
P13
P71
P39
P49
P39
P41
P33
P39
P35
P33
P25
P49
Use the screwdriver to straighten
the hook, so that when the needle
threader lever is pressed down,
the hook will pass through the
needle eye.
Re-thread the needle guide.
Re-thread bobbin thread.
Adjust thread tension.
Hook of needle threader is bent.
Needle guide is threaded
incorrectly.
Improper bobbin threading.
Upper thread tension is too tight.
P83-94 2006.08.04, 09:02Page 2 Adobe PageMaker 6.5C/PPC
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota Ezone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota Ezone in the language / languages: English, German, Dutch, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info