458396
76
Zoom out
Zoom in
Previous page
1/115
Next page
English
Español
Français
61
AB
MAKING BUTTONHOLES
You are able to stitch a buttonhole
that matches the size of button.
Note :
• The machine is not able to stitch
a buttonhole larger than 2.7cm in
diameter.You cannot use round
buttons, thick buttons or buttons
with unique shapes.
• When stitching elastic or light
weight fabric, it is recommended
to use a stabilizer for better
finishes.
A .Attach the buttonhole foot.
Buttonhole foot
B. Turn the pattern selection dial
and select buttonhole stitch
(Stitch No.1).
Set stitch length between "0.
4"and "0.6".
Set stitch width between "4" and
"5".
C. Mark the buttonhole position on
the fabric as illustrated.
Starting position
D.• Place a button on the button
plate
aa
aa
a.
Insert the fabric so that the
marked position is under the
needle.
Lower the presser foot lifter.
• Draw the upper thread and
place it under the buttonhole foot
with the bobbin thread.
Ojales
Se pueden hacer ojales que
correspondan al támano de los
botones.
Nota:
• Con esta máquina no se pueden
hacer ojales de mas de 2.7 cm
de diámetro. No se pueden
utilizar botones redondos,
gruesos o de forma especial.
• Si la tela es elástica o ligera,
conviene colocar un estabilizador
para obtener un resultado más
bonito.
A.Coloque un prensatelas para
ojales.
Prensatelas para ojales
B.Gire el selector de punto para
seleccionar el ojal (n°1).
La longitud de la puntada ha de
situarse entre "0.4" y "0.6".
La anchura de la puntada debe
ser de "4" o "5".
C.Marque la posición de los ojales
en la tela, como se muestra en la
ilustración.
Posicion inicial
D.• Coloque el botón en
el alojamiento
aa
aa
a.
Coloque la tela procurando que
la marca del ojal quede debajo
de la aguja.
Baje la palanca del prensatelas.
• Tire del hilo superior y páselo
por debajo del prensatelas, con
el hilo de la canilla.
Prensatelas para ojales
Confection de boutonnières
Cette machine vous permet de
confectionner des boutonnières
adaptées à la taille des boutons.
Remarque:
• Le diamètre maximal possible
pour les boutonnières est de 2.7
cm. Ne pas utiliser de boutons
ronds, épais ou de forme
spéciale.
• Sur un tissu élastique ou léger, il
est recommandé d'utiliser un
stabilisateur pour obtenir une
meilleure finition.
A. Fixez le pied pour boutonnière.
Pied pour boutonnière
B. Tournez la molette de sélection
du point pour sélectionner le
point pour boutonnière (point n°1).
Sélectionnez une longueur de
point entre "0.4" et "0.6".
Sélectionnez une largeur de
boutonnière de "4" ou "5".
C. Tracez des repères sur le tissu
aux endroits où vous allez faire
les boutonnières, comme le
montre l'illustration.
Position de départ
D.• Placez un bouton dans le tiroir
aa
aa
a.
Placez le tissu de manière a ce
que le repère tracé se trouve en
dessous de l'aiguille.
Baissez le levier du pied-de-
biche.
• Tirez sur le fil supérieur et
placez-le sous le pied-de-biche,
avec le fil de la canette.
Pied-de-biche pour boutonnière
P61-72 2006.08.04, 09:27Page 2 Adobe PageMaker 6.5C/PPC
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota Ezone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota Ezone in the language / languages: English, German, Dutch, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info