458417
45
Zoom out
Zoom in
Previous page
1/115
Next page
Español
English
Français
30
UPPER THREADING
A.Put a thread spool and spool cap on to the spool pin.
• For a small thread spool
• For a large thread spool
Leave a space of 2mm between the thread spool and
spool cap.
B.Press the needle up and down button and raise the
needle to its highest position.
Instead of pressing the needle up and down button,
you can turn the handwheel to raise the needle to its
highest position.
C. • Switch the machine OFF.
• Raise the presser foot lifter.
Note : To thread the tension plate, ALWAYS raise the
presser foot lifter.
D.Hold the thread with one hand, press the thread with
the other hand and thread the thread guide.
Thread the machine following its single thread path.
E.Pass the thread through the needle thread guide.
F.Thread the needle eye from the front to back,leaving
about 6"(15cm) of thread.
Needle threading is easier using the needle threader
(See page 33).
Enhebrar el hilo superior
A.Coloque una bobina de hilo y el tope de bobina en el
eje portabobina.
• Para una bobina pequena
• Para una bobina grande
Deje un espacio de 2 mm entre la bobina y el tope.
B.Pulse el botón para subir y bajar la aguja y suba la
aguja hasta el tope.
En lugar de utilizar este botón, también puede girar
el volante para subir la aguja.
C. • Apague la máquina.
• Suba la palanca del prensatelas.
Nota: Para enhebrar la placa de tensión, suba
SIEMPRE la palanca del prensatelas.
D.Sujete el cabo del hilo con una mano, ejerza una
presión en el hilo con la otra, y empiece a enhebrar.
Enhebre siguiendo el recorrido indicado.
E.Pase el hilo por el guiahílos de la aguja.
F. Pase el cabo del hilo por el ojo de la aguja, de
adelante hacia atrás, y deje unos 15 cm de hilo
suelto.
Resulta más fácil enhebrar la aguja con el
enhebrador (consulte la página 33).
Cheminement du fil supérieur
A.Placez une bobine de fil et le couvercle de la bobine
sur le porte-bobine.
• Pour une petite bobine de fil
• Pour une grande bobine de fil
Laissez un espace de 2 mm entre la bobine de fil et
le couvercle de la bobine.
B.Relevez l'aiguille au maximum en appuyant sur la
touche pour relever et abaisser l'aiguille.
Au lieu d'utiliser cette touche, vous pouvez aussi
relever l'aiguille en tournant le volant.
C. • Eteignez la machine à coudre.
• Relevez le levier du pied-de-biche.
Remarque: Pour passer le fil dans la plaque de tension,
il faut TOUJOURS relever le levier du pied-de-biche.
D.Prenez le fil dans une main et appuyez sur le fil avec
l'autre main, puis passez le fil dans le guide.
Acheminez le fil en suivant le parcours pour fil simple.
E.Passez le fil par le guide-fil de l'aiguille.
F. Enfilez l'aiguille d'avant en arrière, en laissant
environ 15cm de fil.
L'aiguille s'enfile plus facilement avec l'enfile-aiguille
(reportez-vous à la page 33).
P25-36 2006.08.04, 09:00Page 7 Adobe PageMaker 6.5C/PPC
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota EZ901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota EZ901 in the language / languages: English, German, Dutch, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota EZ901

Toyota EZ901 User Manual - English, German, Dutch, French, Italian, Spanish - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info