458417
28
Zoom out
Zoom in
Previous page
1/115
Next page
English
Español
Français
13
AB
HOW TO OPERATE YOUR SEWING
MACHINE
POWER AND LIGHT SWITCH
A Power and light swich
First connect the power cord to the plug
socket of your sewing machine.
Next, connect the plug of power cord to
your wall outlet.
Power and light switch
Plug
Power cord
B Push the switch to the direction to turn
the switch ON .
This switch controls both power and
light.
Push the switch to the direction to turn
the switch OFF.
SELECTING THE STITCH PATTERN
Raise the needle to its highest
position.(See page15"Needle up
and down button")
Turn the pattern selection dial to
select the stitch pattern.
SEWING ADVISOR LCD FUNCTIONS
The selected stitch pattern is displayed on
the sewing advisor LCD.
1.The selected stitch pattern is
displayed.
2.Stitch number
3.Stitch width
The recommended stitch width is
displayed.
4.Stitch length
The recommended stitch length is
displayed.
5.Bobbin winding
Displayed when the bobbin winder shaft
moves to the right. (Usually not displayed)
Flashes with beep sounds when the
machine is not operated correctly.
6.Foot controler
Displayed when the foot controller is
connected to the sewing machine.
(Usually not displayed)
Flashes with beep sounds when the
machine is not operated correctly.
7.Flashing display
Flashes with beep sounds when the
machine is not operated correctly. (See
page 77 "Error messages and beep
sounds")
Cómo utilizar su máquina de coser
Interruptor de corriente y de la bombilla
A Enchufe primero el cable de
alimentación eléctrica en la entrada
prevista para ello en la máquina de
coser.
Introduzca luego el enchufe del cable
de alimentación en la toma de corriente
mural.
Interruptor de corriente y de la bombilla
Enchufe
Cable de alimentación eléctrica
B Pulse el interruptor del lado para
encender.
Este interruptor controla a la vez el
suministro de corriente eléctrica y la
bombilla.
Pulse el interruptor del lado para
apagar.
Selección del punto
Suba la aguja al máximo (consulte la
página 15 "Botón para subir y bajar la
aguja")
Gire el selector de punto para elegir el
tipo de punto.
Funciones de la pantalla LCD de ayuda
La pantalla LCD indica el tipo de punto
seleccionado.
1. Tipo de punto
La pantalla muestra el tipo de punto
seleccionado.
2. Número de punto
3. Anchura de la puntada
La pantalla muestra la anchura de
puntada recomendada.
4. Longitud de la puntada
La pantalla muestra la longitud de
puntada recomendada.
5. Bobinado
Aparece cuando el eje para hacer
canilla se desplaza hacia la derecha.
(No aparece permanentemente)
Parpadea y emite un sonido cuando
no se utiliza la maquina correctamente.
6. Mando de pedal
Aparece cuando el mando de pedal
está conectado a la máquina de coser.
(No aparece permanentemente)
Parpadea y emite un sonido cuando
no se utiliza la máquina correctamente.
7. Mensajes de error (parpadeo)
La pantalla parpadea y emite un sonido
cuando no se utiliza la máquina
correctamente. (Consulte la página 78
"Mensajes de error y sonidos")
Utilisation de la machine à coudre
Interrupteur (alimentation électrique et
éclairage)
A Branchez d'abord le câble
d'alimentation électrique sur l'entrée
prévue à cet effet sur la machine à
coudre.
Ensuite, mettez la fiche du câble dans
la prise murale.
Interrupteur
Fiche
Câble d'alimentation électrique
B Poussez sur le côté de l'interrupteur
pour allumer.
Cet interrupteur commande à la fois
l'alimentation électrique et l'éclairage.
Poussez sur le côté de l'interrupteur
pour éteindre.
Choix du point
Relevez l'aiguille au maximum
(reportez-vous à "Touche pour relever
ou abaisser l'aiguille", à la page 15).
Tournez la molette de sélection du point
pour obtenir le type de point souhaité.
Fonctions de l'écran LCD d'information
Le type de point sélectionné apparaît
sur l'écran LCD
1. Type de point
Le type de point selectionné s'affiche.
2. Numéro du point
3. Largeur de poin
La largeur de point recommandée s'affiche.
4. Longueur de point
La longueur de point recommandée
s'affiche.
5. Bobinage de la canette
S'affiche lorsque l'axe de bobinage
de la canette se déplace vers la droite.
(Ne s'affiche pas en permanence)
Le symbole clignote et un signal
sonore retentit lorsque la machine
n'est pas correctement utilisée.
6. Pédale
S'affiche lorsque la pédale est
branchée sur la machine à coudre. (Ne
s'affiche pas en permanence)
Le symbole clignote et un signal
sonore retentit lorsque la machine
n'est pas utilisée correctement.
7. Symboles clignotants
Ces symboles clignotent et un signal
sonore retentit lorsque la machine
n'est pas utilisée correctement. (Se
reporter a la page 79 "Messages
d'erreur et signaux sonores")
P13-24 2006.08.04, 09:25Page 2 Adobe PageMaker 6.5C/PPC
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota EZ901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota EZ901 in the language / languages: English, German, Dutch, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota EZ901

Toyota EZ901 User Manual - English, German, Dutch, French, Italian, Spanish - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info