603717
52
Zoom out
Zoom in
Previous page
1/115
Next page
English
Español
Français
37
AB
CHANGING THE PRESSER FOOT
Warning:
To prevent injury, ensure the
presser foot is securely held in
place by the presser foot holder.
Removing the presser foot
A.Turn the machine OFF.
Turn the handwheel toward you
and raise the needle.
Also raise the presser foot lifter.
B.Push button of presser foot holder
and the foot will come off.
Attaching the presser foot
C.Position a new foot under the
presser foot holder with the pin
right beneath the groove of the
holder.
D.Lower the presser foot lifter slowly
so that the presser foot holder
catches the foot.
PREPARACIÓN DE LA MÁQUINA
Reemplazo del prensatelas
ADVERTENCIA
Para evitar heridas, asegúrese de
que el prensatelas está
correctamente sujeto en su soporte.
Desmontaje del prensatelas
A.Apague la máquina.
Gire el volante hacia Ud. para
levantar la aguja.
Suba la palanca del prensatelas.
B.Pulse el botón del soporte del
prensatelas para que se suelte el
prensatelas.
Instalación del prensatelas
C.Coloque un prensatelas nuevo
debajo del soporte procurando
que la varilla del prenstatelas
quede debajo de la ranura del
soporte.
D.Baje la palanca del prensatelas
despacio hasta que se junten el
prensatelas y su soporte.
PREPARATION DE VOTRE MA-
CHINE
Remplacement du pied-de-biche
AVERTISSEMENT
Pour éviter tout risque de blessures,
assurez-vous que le pied-de-biche
est bien maintenu par son support.
Dépose du pied de biche
A.Eteignez la machine à coudre.
Tournez le volant vers vous pour
lever l'aiguille.
Relevez aussi le levier du pied-
de-biche.
B.Appuyez sur le bouton du support
du pied-de-biche pour dégager le
pied-de-biche.
Mise en place du pied-de-biche
C.Placez un nouveau pied-de-biche
sous le support en veillant à ce
que la goupille se trouve juste en
dessous de la rainure du support.
D.Abaissez doucement le levier du
pied-de-biche jusqu'à ce que la
goupille du pied-de-biche
s'emboîte dans le support.
P37-48 2006.08.04, 09:24Page 2 Adobe PageMaker 6.5C/PPC
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota EZ800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota EZ800 in the language / languages: English, German, Dutch, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info