458415
18
Zoom out
Zoom in
Previous page
1/80
Next page
7
English Français
A SIDE DIAL MODEL
VARIOUS CONTROLS
Pattern selection dial (fig A)
To select stitch, be sure needle is at its highest
position.
The required stitch is selected by turning the Pattern
Selection Dial.
The Pattern Selection Dial can be turned either way.
Stitch length dial (B-1)
Stitch length can be easily changed by turning the
Stitch Length Dial.
For shorter stitch, turn Stitch Length Dial to a lower
number.
For longer stitch, turn to a higher number.
Standard stitch length is between 2 to 3.
Presser foot lever (fig C)
There are 3 positions for the presser foot lever.
1. To sew, the presser foot should be at the lowest
position a.
2. To insert or remove fabric, and to change presser
foot, middle position b.
3. To remove thick fabric, highest position c.
Raise presser foot lever up as far as it will go for
position c.
The lever will not stop at position c.
Hold it in position c.
DIVERS REGLAGES
Cadran de sélection du point (fig. A)
Pour sélectionner le point, soyez sûr que l’aiguille est
à sa position la plus haute.
Le point souhaité est obtenu en tournant le cadran de
sélection du point.
Le cadran de sélection du point peut être tourné soit
vers la gauche soit vers la droite.
Cadran de réglage de la longueur de point (B-1)
La longueur du point peut être facilement réglable en
tournant le cadran de sélection du point.
Pour les points plus courts, régler le cadran de
réglage du point sur un chiffre plus petit.
Pour des points plus longs régler sur un chiffre plus
grand.
La longueur normale du point est de 2 à 3.
Levier presseur de pied-de-biche (fig. C)
Il y a 3 positions pour le levier de pied-de-biche.
1. Pour coudre, le pied-de-biche doit être à sa
position la plus basse a.
2. Pour placer ou enlever un tissu, et pour changer de
pied-de-biche, position centrale b.
3. Pour enlever des tissus épais, position la plus
haute c.
Amener le levier presseur de pied-de-biche
aussi loin qu’il puisse aller c.
Le levier ne s’arrêtera qu’à sa position c.
RS2000-2D_EFNI.book Page 7 Thursday, March 30, 2006 3:31 PM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota ESS224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota ESS224 in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota ESS224

Toyota ESS224 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info