458413
69
Zoom out
Zoom in
Previous page
1/80
Next page
58
English
Trouble chart
If trouble is still apparent in the machine, please contact where you purchased or our web.
site (Europe only).
Do not try to correct fault by yourself.
PROBLEM PROBABLE CAUSE CORRECTION
Breaking lower
thread
Thread not wound evenly on the bobbin or not drawn up
correctly
Lower thread tension too tight
Lint is stuck in the bobbin case and inside the tension spring
P. 10, P. 14
P. 53 - P. 54
Remove lint and
fluff with a cleaning
brush
Skipping stitches Needle not fully inserted
Needle bent or blunt
Size or type of needle and thread not suitable for the material
Incorrect upper threading
Too much oil on the machine
P. 55
P. 56
P. 63
P. 14
P. 52
Irregular stitches Incorrect size of needle for the material
Upper thread tension is too loose
Incorrect lower thread tension
P. 63
P. 21
P. 53 - P. 54
The material not fed
correctly
Pattern selection dial not set correctly
Feed teeth are down
Lint is stuck in the feed teeth
P. 65
P. 23
P. 57
Noisy machine Check the thread in shuttle, even the slightest amount of thread
inside the shuttle may cause noise or binding, use material like
tooth pick or cotton swab to clean
P. 57
The material
puckers
Upper or lower thread tension is too tight
Stitch too long for material
Thread too thick
Incorrect threading of upper or lower thread
P. 21, P. 53 - P. 54
P. 65
P. 63
P. 14, P. 11
Breaking needle Needle not correctly inserted
Needle bent
Needle clamp screw too loose
Upper thread tension too tight
Needle too fine for the material
Dials have been changed while the needle was down in the
material
P. 55
P. 56
P. 55
P. 21
P. 63
P. 65
Quilt60_EFNI.book Page 58 Thursday, March 30, 2006 3:44 PM
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota ESG325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota ESG325 in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota ESG325

Toyota ESG325 User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info