603761
48
Zoom out
Zoom in
Previous page
1/52
Next page
48
• Troubleshooting
What is the problem? Check the following
possibilities before contacting the service
center for repair.
Trouble Cause Countermeasure Page
Does not
rotate
Does not work
The power plug is not inserted Connect the power plug correctly
11
Thread is tangled in the hook,
or there is a broken needle in
the hook
Clean the hook
43
Loud noise
Slow rotation
There is thread waste or dust
in the hook or feed dog
Remove thread waste or dust
43
Broken needle
The needle is incorrectly
installed
Install the needle correctly
25
The needle clamp screw is
loose
Firmly tighten the screw
25
The needle is too fi ne for the
cloth
Use a needle appropriate to the
fabric
26
The tension of the upper
thread is too tight
Adjust the thread tension
32
The fabric is being pulled too
strongly
Do not pull the fabric strongly
27
The bobbin case is not in the
correct position
Put the bobbin case in the correct
position
44
Upper thread
breakage
The upper and lower thread
are not correctly threaded
Thread the upper and lower thread
correctly
15, 16
The thread is tangled in the
bobbin case or hook
Remove thread waste from the
feed dog and hook
43
The tension of the upper
thread is too tight
Adjust the thread tension
32
The needle is bent
The point of the needle is burred
Replace with a good needle
25
The needle, thread and fabric
combination is inappropriate
Use an appropriate needle, thread
and fabric combination
26
Lower thread
breakage
The lower thread is incorrectly
threaded
Thread the lower thread correctly
15
Fabric is not
fed through
There is thread waste in the
feed dog
Remove thread waste from the
feed dog and hook
43
The feed dog is lowered Raise the feed dog
9
The stitch length dial is set to
“0”
Adjust the stitch length dial
9
The stitch length amount is too
small
Adjust the stitch length dial to an
appropriate setting
9
The pressure applied by the
presser foot is too light
Adjust the pressure applied by the
presser foot to an appropriate setting
9
Maintenance
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota ECO34B - SP20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota ECO34B - SP20 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota ECO34B - SP20

Toyota ECO34B - SP20 User Manual - German - 51 pages

Toyota ECO34B - SP20 User Manual - Dutch - 51 pages

Toyota ECO34B - SP20 User Manual - French - 51 pages

Toyota ECO34B - SP20 User Manual - Spanish - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info