603705
51
Zoom out
Zoom in
Previous page
1/55
Next page
51
4
Maintenance
Trouble Cause Countermeasure Page
Fabric not
feeding
through the
machine
The feed dog is dirty
Remove any lint and fluff from
the feed dog
44
Pattern selection dial set to
a buttonhole number – “2”
or “4”.
Reset the stitch selection dial
to the desired stitch
23
The feed dog is lowered Raise the feed dog 8
The stitch length dial is set
to “0”
Adjust the stitch length dial 23-25
The stitch length is too short
Adjust the stitch length dial to
an appropriate setting
23-25
The presser foot pressure is
too light
Increase the presser foot
pressure
8
Missed
stitches
The needle is incorrectly
inserted
Insert the needle correctly 28
The needle is bent Use a straight needle 28
Needle and thread not
suitable for the fabric
Use the correct needle and
thread for the fabric
29
Incorrect upper threading
Rethread the upper thread
correctly
18, 19
The fabric
wrinkles /
puckers
The tension of the upper
thread is too tight
Adjust the thread tension 35
The machine is incorrectly
threaded
Rethread the machine 16-19
Needle is too thick for the
fabric
Use a finer needle to suit the
fabric
29
The needle is burred Insert a new needle 28
Stretch fabric is being sewn Use the ball point needle 29
Lower thread
showing on
the top of the
fabric
Incorrect bobbin threading Rethread the bobbin correctly 16, 17
The tension of the upper
thread is too tight
Adjust the thread tension 35
Incorrect plastic bobbin used
or a metal bobbin is used
Only use the designated
TOYOTA bobbin
14
Upper thread
showing on
the under
side of the
fabric
The tension of the upper
thread is too loose
Adjust the thread tension 35
Incorrect upper threading
(not threaded through the
thread guide)
Rethread the upper thread
correctly
18, 19
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota ECO26A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota ECO26A in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota ECO26A

Toyota ECO26A User Manual - German - 55 pages

Toyota ECO26A User Manual - Dutch - 55 pages

Toyota ECO26A User Manual - French - 55 pages

Toyota ECO26A User Manual - Spanish - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info