66504
13
Zoom out
Zoom in
Previous page
1/21
Next page
© TOXIC 2007
Page 13
- Use only a shielded audio cables for the wiring between „low level in“ of
the amplifier and RCA or DIN outputs of the radio.
- Lay the signal, speaker and power cables separately with enough
distance from another and also from any other car cable. If not
possible, you can lay the circuit and ground cable together with the
serial cables. Audio and speaker cable should be as far away from these
as possible. The Rem cable to the automatic antenna output of the radio
can be laid together with the signal cables.
- Avoid ground loops by laying the ground wiring of all components to a
centre point in a star-like way. You can find the best central point in
measuring the voltage directly at the battery. Now compare this voltage
value with the chosen ground point and the (+) terminal of the amplifier.
If the measured voltage is only less different, you have found the correct
central. Otherwise you have to look for another point. You should
measure with the ignition being switched on and additionally switched on
consumers (rear window heating, light etc).
- If there are pickups from external electrical sources into the speaker
cables, divide the core leads and twist them together.
- If there are noises from the car electrics, add an interference
suppression choke into the power wiring.
- If there are humming noises, use thicker ground cables or add further
ground cables to the chassis.
- To reduce contact resistance and bad and loose contacts, please tin the
cable ends or use multicore cable ends, spade terminals or others. Gold-
plated spade terminals are free of corrosion and have the lowest contact
resistance.
- Should all these measures be without any success, the use of a ground
loop isolator may solve the problem.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toxic TX 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toxic TX 2000 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info