671091
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
Automatic Centring Guides:
Lowering the toasting levers closes the centring guides and holds the bread or toaster food
centrally in the toasting slots.
NOTE: The toasting lever will not lock down unless the toaster is plugged into an electrical
outlet.
Toasting
1. Ensure the crumb tray is pushed all the way into the back of the toaster and the toasting
levers are in the UP position.
2. Make sure no bread or other objects are inside the toasting slots.
3. Place Toaster on a at, level, heat resistant surface.
4. Plug the power cord in to a mains outlet.
5. Position the browning selector dial to desired setting. To test toasting times for browning,
it is best to use all toasting slots and position the browning selector dial between 3 and 4,
and then adjust each subsequent toasting to your preference.
6. Remove all protective wrappings from food before placing into the toasting slots.
7. Insert bread or toaster food into the toasting slots.
8. Lower the toasting levers until locked into place. The automatic centring guides hold
food upright for uniform side-to-side toasting. When the bread is lowered into position,
toasting will begin.
9. When the toast reaches the selected browning level, it will pop up automatically.
10. Remove bread from toasting slots. Use care when removing bread as the bread and the
top of the toaster will still be hot.
11. If your toast jams, unplug the cord and move the loading lever up and down a few times
to raise jammed bread.
12. To interrupt toasting, press the corresponding CANCEL button.
13. Unplug cord from wall outlet when not in use.
Buttons
Reheat Button:
This button allows you to reheat your food without any extra browning or toasting.
Frozen Button:
This button allows you to defrost and toast frozen bread.
Cancel Button:
The cancel button allows you to stop the toasting process.
NOTE: The toasting levers will not lock into position unless the Toaster is plugged in.
When toasting a single slice, the bread may be placed in any toasting slot.
To prevent a re hazard, never place bread over the opening of the toaster, always place bread
into the slots
DO NOT change the browning selector knob selection during the toasting cycle. First press
the CANCEL button; then turn the browning selector knob to adjust the browning level. Lower
the toasting levers and toast until the desired toast colour is achieved.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may
damage the heating element or cause injury.
5 - Using Your Appliance
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tower T20012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tower T20012 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info