4
Installing the Batteries
Your TOTAL CONTROL needs two new AA/LR6 alkaline batteries.
1 Remove the battery cover from the back of your
TOTAL CONTROL.
2 Match the batteries to the (+) and (-) marks inside the
battery case, then insert the batteries.
3 Press the battery cover back into place.
Features and Functions
Picture of the TOTAL CONTROL on page 3.
LED
The LED (Light Emitting Diode) flashes red to show the
remote is working.
Device keys
The TV, VCR/DVD, SAT and AUX keys select the device
to be controlled. For example pressing the TV key allows
the remote to control the functions of you Television,
after pressing the VCR/DVD key you can operate your
Video Recorder or DVD Player, the SAT key operates your
Satellite Receiver or Cable Converter etc.
Power key
The Power key controls the same function as on your
original remote.
SET key
The SET key is used to set up your TOTAL CONTROL and
to access special functions.
Number keys
The number keys (0-9, 10, 20 (AV)) provide functions just
like your original remote. If your original remote uses
one/two digit input switching (-/-- symbol), this function
can be obtained by pressing the -/-- key. If your original
remote has a 20 key, this function can be found under the
AV k e y.
AV k ey
The AV key operates the same function as it did on your
original remote control.
Menu Key
The Menu key controls the same function as it did on your
original remote.
Directional Keys
If available on your original remote, these keys will allow
you to navigate through the menu of your device.
The EXIT key
With the EXIT key you will EXIT the menu.
The OK key
The OK key confirms your choice made in the menu.
2
1
3
4
5
6
7
8
9
10
