485687

Toshiba W 708 Manual

18
Zoom out
Zoom in
Previous page
1/42
Next page
18
To add channels
To erase channels
Adding or erasing channels
Adding channels
If a desired channel cannot be scanned
automatically because of a weak signal, it can be
added to the memory.
Erasing channels
You can erase a stored channel from the memory
if it is unnecessary.
1) Follow steps 1 to 3 of “Incoming Antenna/CATV
Signals”.
2) Select “ADD CH” or “ERASE CH” using
PLAY/X2
or
STOP
.
3) Enter a channel number of 1 to 125 using
number buttons
.
For more than 100 number, first press
100
.
For CATV channels, refer to the chart below.
(For other orders, check with your cable
company.)
4) Repeat steps 2) and 3) to add or erase
channels as necessary.
5) Press
PROG.
to exit.
Selecting stored channels
Once the active channels have been stored, you
can select the channels in two ways below.
Number buttons
To enter digits of the channel number.
• For one-digit number, enter 0 before.
• For more than 100 number, first press
100
.
• Each
number button
needs to be pressed
within 2 seconds.
CH/TRK
To shift up or down the stored channel numbers.
PROG
TV
TVAC
n
O
n
O
n
O
FFO
OSETCH
PUSH ~90EYSK
T
––
––
TV /C TAV
AUTO SCA
n
ADD CH
ERAS CEH
ED:
n
SET UP
PRESET
PROGRAM
PROG
TV
TVAC
n
O
n
O
n
O
FFO
OSETCH
PUSH ~90EYSK
T
––
––
TV /C TAV
AUTO SCA
n
ADD CH
ERAS CEH
ED:
n
SET UP
PRESET
PROGRAM
Storing Channels on the VCR (continued)
Cable Box/DSS Output Channel
Setting
To set the Cable Box/DSS output Channel on the
VCR.
1) Press
PROG.
to display the MENU screen.
2) Select “PRESET” using
FF
or
REW
, and press
ENTER
.
3) Select “CABLE BOX/DSS” using
PLAY/X2
or
STOP
, and press
ENTER
.
4) Select “NO”, “C.BOX” or “DSS” using
FF
or
REW
according to your connection type.
5) If set to “C.BOX” or “DSS”, select “OUTPUT CH”
using
PLAY/X2
or
STOP
. Then enter the output
channel number of your cable box (Usually 3 or
4, check the rear of the cable box.) or line input
mode “L1” using the
I.SELECT
button according
to your connection.
6) Press
PROG.
to exit.
PROG
C.BOXO
n
SSD
USE
ED:
n
SET UP
PRESET
PROGRAM
PROG
C.BOX
SSD
HC
3
OSETCH
PUSH ~90EYSK
T
USE
OUT UT CHP
ED:
n
SET UP
PRESET
PROGRAM
O
n
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba W 708 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba W 708 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info