485686
38
Zoom out
Zoom in
Previous page
1/42
Next page
38
No power.
The power cord is not plugged in.
Plug the power cord into the outlet firmly.
Although the power is on, the VCR will
not work.
There is no cassette.
Load a cassette. (page 20)
The clock does not work.
There has been a power failure.
Reset the clock. (page 16)
The timer does not work properly.
The time is incorrect.
Set the clock correctly. (page 16)
The picture does not appear on the TV
screen.
The video channel or video input mode is not
set correctly.
Set the TV channel to the video channel (3 or
4) or set the video input mode on the TV.
(page 11)
The TV signal is weak.
Adjust the antenna direction or use an
optional antenna booster.
The power cord is not plugged in.
Plug the power cord into the outlet firmly.
The picture does not appear on the TV
screen during recording and playback.
The video channel or VCR mode is not set
correctly.
Press
TV/VCR
to select the VCR mode and
set the TV channel to 3 or 4. (pages 11, 26)
The VCR does not record.
The loaded cassette has no safety tab.
Use a cassette with a safety tab or cover the
hole with adhesive tape. (page 20)
The playback picture is poor.
Tracking is not set appropriately.
Adjust the tracking manually. (page 21)
The video heads are dirty.
Clean the video heads with a commercially
available cleaning tape.
The desired sound is not heard, such as
SAP, stereo, or regular sound.
Setting of sounds is not correct.
Select a desired sound using
A.SELECT
.
(page 34)
Noise is present in the Hi-Fi sound being
played.
Tracking is not set appropriately.
Adjust the tracking manually. (page 21)
The timer recording function does not
work.
There is an error in programming.
Reset the timer recording program. (page 27)
There is no cassette in the VCR.
Load a cassette with the safety tab attached.
(page 20)
The cassette does not have the safety tab.
Use another cassette with a safety tab or
cover the hole with adhesive tape. (page 20)
The timer indicator is not displayed.
Press both
TIMER
simultaneously. (page 28)
There has been a power failure.
Reset the clock. (page 16)
The cable box is not turned on.
Turn on the cable box.
The VCR Plus+
®
system recording cannot
be done.
The guide channel numbers are not set up
correctly.
Make the guide channel number setting.
(page 30)
The cable box is not turned on when the
channel comes in the VCR via the cable box.
Turn on the cable box.
The timer indicator is not displayed.
Press both
TIMER
simultaneously. (page 33)
ADDITIONAL INFORMATION
Before Calling Service Personnel
Check the following symptoms before requesting servicing.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba W 701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba W 701 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info