617362
59
Zoom out
Zoom in
Previous page
1/64
Next page
57
BEFORE REQUESTING SERVICE
If your unit does not work properly check the following before calling a service engineer.
7
4
CAUSE
SYMPTOMS SOLUTION
PAGE
POWER
No power.
The Mains lead is not connected.
Main power switch is OFF.
TIMER REC buttons is ON.
(TIMER REC indicator is on.)
Moisture condensation has formed inside recorder.
4
7
24
2
7
No picture, no sound.
TV BROADCAST RECEPTION
Recorder does not work
even though STANDBY
light is on.
Sound OK, poor picture.
Picture OK, poor sound.
Poor reception.
Poor colour or no colour.
VCR
INDEX mark was not
registered.
The Mains lead is disconnected.
Aerial connector is not connected or wires
are broken.
The ON/STANDBY button is off.
Possibly station trouble.
Possibly station trouble.
Possibly local interference.
Possibly station trouble.
Possibly local interference.
Volume control set at minimum position.
Aerial connector is not connected or wires
are broken.
Possibly station trouble.
Possibly station trouble.
Possibly local interference.
Aerial connector is not connected or wires
are broken.
Colour control is not adjusted.
Protection tab on the cassette tape has been
removed.
Main power switch is OFF.
Clock is not set.
START/END time is not set correctly.
TIMER REC button is OFF.
Present time is not set correctly.
One-Touch Timer Recording (OTR) is ON.
INDEX mark was recorded at the beginning
of the tape.
Aerial connector is not connected or wires
are broken.
Recording does not work.
Timer recording does not
work.
Connect Mains lead to AC outlet.
Set it to ON.
Set it to OFF.
(TIMER REC indicator is off.)
Wait for a few hours.
Connect the Mains lead to the AC outlet.
Check aerial connections or broken wires.
Press the ON/STANDBY button.
Try another channel.
Try another channel.
Check aerial connections or broken wires.
Move the aerial away from the source of
interference.
Try another channel.
Move the aerial away from the source of
interference.
Increase VOLUME control.
Check aerial connections or broken wires.
Try another channel.
Check aerial connections or broken wires.
Try another channel.
Move the aerial away from the source of
interference.
Adjust the colour settings.
Place an adhesive tape over the gap.
Set main power to ON.
Set the clock.
Set the START/END time correctly.
Set the TIMER REC button to ON.
Set the present time correctly.
After OTR recording, set the timer recording.
Let the tape run for a couple of seconds
before recording the first INDEX mark.
30
26
11
24
24
11
18
4
14
59
13
7
13
7
13
59
13
59
7
13
13
Noise bars on screen.
Can not locate INDEX mark.
DVD
Tracking is not adjusted.
Video heads are dirty.
The tape is worn or damaged.
The tape is worn or damaged.
Adjust the TRACKING control.
Clean the video heads.
Try another tape.
Try another tape.
19
59
35
Eject the disc and clean it.
The disc is dirty.
Some times a small amount of picture
distortion may appear. This is not a malfunction.
It is in fast forward or fast reverse playback.
The playback picture has
occasional distortion.
5N50301A [E] P54-Back 1/7/05, 4:53 PM57
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba VTW2887 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba VTW2887 in the language / languages: English as an attachment in your email.

The manual is 5,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info