617359

Toshiba VTW2186 Manual

25
Zoom out
Zoom in
Previous page
1/64
Next page
23
Press or to select PDC
ON or OFF. When you have
finished setting all your record-
ings, press ENTER.
To set the timer for another
programme, press
or to
select another programme line, then press ENTER.
Repeat steps 3 to 5 to set the second programme.
PDC stands for Programme Delivery Control system. A
PDC signal is broadcast at the beginning and end of
most TV programmes. This lets your unit know if a TV
programme is running early or late.
PDC is default OFF on this unit. If you switch PDC ON
then a recording will not start until your unit receives the
PDC signal. Without PDC your recording would have
started and ended as programmed time.
EXIT
SET
SELECT
: MENU
:
OK : ENTER
:
TIMER REC SET
DATE
START
END
CH
SPEED
23 SAT
3
LP
PDC OFF
13: 00
14: 30
EXIT
SET
SELECT
: MENU
:
OK : ENTER
:
TIMER REC SET
DATE
START
END
CH
SPEED
23 SAT
3
LP
PDC OFF
13: 00
14: 30
TIMER REC SET
DATE
START
END
CH
SPEED
23 SAT
1
– –
SP
PDC OFF
:
– –
11: 30
EXIT
SET
SELECT
: MENU
:/ 0
-
9
:
TIMER RECORDING
1
Press TV/VCR to select TV/VCR mode.
Press MENU/SETUP.
Timer recording can be programmed
on screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programmes within 1 month.
Check that the TIMER REC
SET option is selected, then
press ENTER.
Press
or to select one of
the program line, then press
ENTER.
2
Press or to select the
desired date or every day or
every week setting (See next
page.), then press .
3
4
Preparation
• Load a cassette tape with the erase prevention tab intact.
The unit will automatically turn on.
• Make sure that the clock shows the present time correctly.
Set the start time, end time,
channel and tape speed as in
step 3.
Example:
Programme a timer recording for 13:00-14:30, channel 3
(Tape speed : LP).
5
6
Press two TIMER REC. The REC indicator will light.
The Timer is programmed, when the programmed time is
reached, the recording is automatically started.
NOTES:
• If programming is performed without a
tape in the unit, or with a tape without
an erase prevention tab, the Timer
Recording is not possible. If a tape
without an erase prevention tab is in
the unit, the tape will be ejected.
•To record from external equipment
connected via the SCART socket
(AV1) or the front AV socket (AV2),
press
or repeatedly until "AV1"
or "AV2" appears when setting the
channel in step 4.
• The VCR section cannot be used
while the REC indicator is lit. If
you want to use the VCR operation,
press two TIMER REC to deactivate
the timer.
• If there is a power failure, the power
plug is disconnected, or the MAIN
POWER (ON) Switch is switched off
for more than approx. 30 mins, all
programmed timer recordings and
clock settings will be lost. In this case,
reset the clock (see page 11) and
reprogram any timer recordings.
• If you want to correct the digits while
setting, press
until the item you
want to correct flashes, then press
or to correct the desired setting.
To cancel timer recording, press the buttons
again and REC indicator will go out.
5N40101B [E] P14-23 5/28/04, 15:2223
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba VTW2186 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba VTW2186 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info