Manual Toshiba tw420 (page 32 of 51) (English)

214716

Zoom out

Zoom in

1/51

62 63

Network and

USB memory

Using the Network Utility

Displaying a computer’s screen via the projector

Launch the Network Utility

software application.

When the Network Utility launches, the Screen

Image transmission mode window appears on

the computer screen.

To switch to the Screen Image transmission

mode window from another mode, click on the

Screen Image icon

Select Transmission mode.

Click on Update automatically or Update manually. See step

for the meanings of

Update automatically and Update manually.

Click on the Advanced button.

The Screen Image: Advanced Settings dialog

appears. Set the dialog as shown below, as

necessary.

Interruption

Check the No Interruptions checkbox to

prevent other computers from interrupting the

projector, for example, during presentation.

Window Display

Select the Place in Tasktray at the start

of transmission checkbox to iconify the

Network Utility and place it in the computer’s

tasktray when transmission initiated.

To display the window, double click on this

icon, or right click and select Open from the

popup menu. Even with the Network Utility

window minimized, you can use the pop-

up menu to stop or resume transmission as

described in step

and later.

Transmission Mode (Image)

Selecting High quality improves the

quality of the projected image, but lowers

communication speed. Selecting High speed

has the opposite effect.

Transmission Mode (Sound)

Check the Transmit sound to a projector

(Only when connected with one projector)

checkbox to transmit the sound being played

on a computer to the projector.

Note: The sound can be sent when only one projector is connected.

■

•

Network Mouse Controller

Check the Control computer mouse pointer using remote control (Only when

connected with one projector) checkbox to control computer mouse pointer

with Mouse control button, PAGE+ button, PAGE - button, L-CLICK button and

R-CLICK button of the projector’s remote control.

Note 1: This function is available when only one projector is connected to computer.

Note 2: When you use the Network Mouse Controller function, do not connect the

mouse remote control receiver to your computer. The function will fail to

operate properly.

Select the Transmission Image you

wish the projector to display.

Select Desktop

The computer screen image is transmitted as-is.

Select application window

Select a running application (e.g. Microsoft

PowerPoint

), and send that application’s

window only.

The desktop and a list of running applications are displayed.

Select the desired application from this list. (If the desired

application is not on the list, launch it. Note that if too many

applications are running, it will consume the computer’s

resources, which could slow communication speed.)

Select the projector to be

transmitted.

The IDs of projectors accessible for transmission

will be listed. (When a projector name is set,

that name appears instead of MAC address.)

Select the checkbox of the projector you wish

to transmit to from this list. Then icon

displayed on the projector’s screen for a few

seconds.

It is possible to select up-to four projectors.

Click on the button.

When “Update automatically” is selected in step

Screen images are sent consecutively after the button is clicked. Besides,

the sound being played on a computer can be sent to the projector.

When “Update manually” is selected in step

A single screen image is sent when the button is clicked.

To halt transmission from Update automatically, click on the

button.

If the Network Utility icon has been placed in the tasktray, double click on the icon

to display the window, then halt transmission, or right click on the icon, and halt

transmission.

•

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tw420 in the language / languages: English as an attachment in your email.

The manual is 14,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba tw420 Manual

Product: