214716
15
Zoom out
Zoom in
Previous page
1/51
Next page
28 29
Operations
Precautions
Lamp characteristics may rarely cause the brightness to fl uctuate slightly.
The DLP
®
chip is made using extremely advanced technology. There may be black spots
(pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. These
are intrinsic characteristics of the technology and are not malfunctions.
Notes
A lamp is consumable item. If used for extended periods, images will appear dark, and
the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The
lifetime of the lamp depends on conditions of use.)
Although this projector supports a wide range of RGB signals
p.97
, any resolutions not
supported by this projector (XGA) will be expanded or shrunk, which will affect image
quality slightly. To view high-quality images, set the computer’s external output to XGA.
With some models of computer having LCD displays or the like, displaying images
simultaneously on the projector and the monitor’s display may prevent the images from
displaying properly. If this happens, turn off the computer’s LCD display. For information
on how to turn off the LCD display, see the computer’s owner’s manual.
If no signal is being input from the connected equipment or signal input is stopped while
projecting, the No signal message will appear.
If a signal not supported by the projector is input, the Unsupported signal message
will appear.
If an unavailable operation button is pressed, the
icon will appear with a beep sound
(if the beep sound is set to [On]).
Moving pictures played back on computers using DVD software may appear unnatural
when projected with this projector. However, it is not a malfunction of the projector.
Basic operations (Continued)
Using handy features
Using auto setting (For computer input only)
This function automatically sets up the projector to the optimum state. It
sets up sampling phase, frequency and screen position, for each type
of the input signal by using simple operations.
Press the remote control’s AUTO SET button.
The icon will appear during processing.
Notes
The image may not be projected or auto adjustment/setting may
not be performed correctly for input signals other than those
supported by the projector
p.97
,
p.98
.
If auto setting fails adjustment, adjust manually with the Position adjustment
menu
p.37
.
Correcting the keystone distortion
When the projector placement angle against the screen is changed while projecting the
image, the picture will undergo keystone (trapezoidal) distortion.
This projector is capable of correcting this keystone distortion.
Before correction
After correction
The keystone distortion will be corrected automatically based on the projector’s
placement angle.
Adjusting Keystone distortion [Manual]
1
Press the KEYSTONE button.
2
Use the buttons for keystone
adjustment.
Notes
Depending on the amount of keystone adjustment
and the content of images, some information may
be lost, or the picture quality may suffer.
Even if [Auto keystone] is set to [On], keystone distortion can be adjusted
manually. Note that if you change the position or angle of the projector, automatic
keystone correction will be performed again.
When [Auto keystone] is set to [On], the automatic keystone correction will be
performed each time the power is turned on.
The keystone correction settings are memorized after the power has been turned off.
Therefore, it is recommended that you set [Auto keystone] to [Off], if the case is that
the projector placement angle against the screen remains unchanged and you do not
wish to change the keystone adjustment that you set.
Some adjustments using both digital zoom and keystone correction while displaying
an input image with a 16:9 aspect ratio, may affect displaying the menu properly. In
such a case, reset either digital zoom or keystone correction to use the menu.
Remote
control
Control panel
Remote
control
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tw420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tw420 in the language / languages: English as an attachment in your email.

The manual is 14,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info