429908

Toshiba toshiba dynadock v usb Manual

46
Zoom out
Zoom in
Previous page
1/108
Next page
46
Troubleshooting and Support
Troubleshooting
Connection/Docking
Network
USB
Problem(s)
Solution(s)
I cannot get the computer
to dock.
Make sure the USB cable connecting the devices is secure on
both ends.
The connection to the
dynadock™ has been lost.
The computer may be in standby/sleep/hibernation mode. The
computer will re-connect when it resumes from standby/sleep/
hibernation.
The USB cable may have been disconnected. Re-connect the
USB cable.
Problem(s)
Solution(s)
Cannot access the local area
network (LAN).
Check that the computer is properly configured to
communicate with the network before connecting the LAN
cable to the dynadock™. If necessary, contact your system
administrator for assistance.
Check that the network cable is properly connected to the
dynadock™. For more information see “Connecting to a
network” on page 22.
Make sure the dynadock™ is connected to your computer with
a USB cable and the computer is docked.
If the problem is related to the dynadock™ hardware, see the
“Toshiba Support” on page 47.
Problem(s)
Solution(s)
A device connected to the
dynadock™ does not work
or fails to work after
resumption from standby/
sleep/hibernation or restart.
Yellow exclamation points
appear in the Windows
®
Device Manager next to one
or more of the connected
USB devices.
Make sure the dynadock™ is connected to your computer and
the computer is docked.
Check that the cable connection between the USB port on the
dynadock™ and the USB device is secure.
Make sure that the USB device drivers are properly installed.
Refer to the operating system documentation for more
information.
Make sure that the AC adaptor (if applicable) is connected
securely to the USB device and a live electrical outlet.
Refer to the documentation that came with the USB device.
This problem may occur when there are four USB devices
connected to the dynadock™ and the computer enters
standby/sleep/hibernation mode or is restarted. To resolve the
issue, disconnect and then re-connect one of the USB devices.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba toshiba dynadock v usb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba toshiba dynadock v usb in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info