485655

Toshiba TLP-X200 Manual

36
Zoom out
Zoom in
Previous page
1/53
Next page
70 71
Network/
USB memory
Displaying computer’s screens via projectors using the
Multiscreen function
1
Launch the Network Utility
software application.
The Screen Image transmission mode window
appears on the computer’s screen.
2
Click the Multiscreen icon .
The Network Utility window changes to
Multiscreen transmission mode.
3
Select Transmission mode.
Click Update automatically or Update manually. See step
7
for the descriptions of
Update automatically and Update manually.
4
Click the Advanced button.
The Multiscreen: Advanced Settings dialog
appears. Set the dialog as shown below, as
necessary.
Window Display
Select the Place in Tasktray at the start
of transmission checkbox to iconify the
Network Utility and place it in the computer’s
tasktray when transmission initiated.
To display the window, double click this icon,
or right click and select Open from the popup
menu. Even with the Network Utility window
minimized, you can use the pop-up menu to
stop or resume transmission.
Transmission Mode (Image)
Selecting High quality improves the
quality of the projected image, but lowers
communication speed. Selecting High speed
has the opposite effect.
Transmission Mode (Sound)
Check the Transmit sound to a projector (Only when connected with one
projector) checkbox to transmit the sound being played on a computer to the
projector.
Note: The sound can be sent when only one projector is connected.
•
•
•
Network Mouse Controller
Check the Control computer mouse pointer using remote control (Only when
connected with one projector) checkbox to control computer mouse pointer
with Mouse control button, PAGE+ button, PAGE - button, L-CLICK button and
R-CLICK button of the computer’s remote control.
Note 1: This function is available when only one projector is connected to computer.
Note 2:
When you use the Network Mouse Controller function, do not connect the
mouse remote control receiver to your computer. The function will fail to
operate properly.
5
Arrange the virtual display
layout.
a
Clicking the Display Properties button in
the Control window displays the window for
screen display settings.
b
Right click the desired virtual display
(Toshiba DPJ Secondary Display Driver) and
select Attached from the popup menu.
c
Allocate screen displays by drag and drop of
monitor icons.
d
Click OK button in the window for screen
display settings, then the Screen Layout
in the Control window will be updated
accordingly.
When you check Switch to the last
screen settings when using next time
the virtual display layout that has been set
will be memorized upon exit from Network
Utility and it will switch to the screen settings
the next time you use the Multiscreen feature.
•
Using the Network Utility (Continued)
Downloaded from www.Manualslib.com manuals search engine
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-X200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-X200 in the language / languages: English as an attachment in your email.

The manual is 13,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info