485655
29
Zoom out
Zoom in
Previous page
1/53
Next page
56
57
Network/
USB memory
Note
If you select [Network Projector] in the Setting display (2) menu, the same items
in [Network Utility] will be displayed except for the following 2 items.
1
[Easy Connect (USB memory)] feature is not available.
2
In the item [Application], [Password] and [Disconnect] are available as
follows.
Category Item Description
Application
Password
Set password On
Off
Disconnect Disconnect while transferring an image using Network Projector.
[Yes
No] [Enter: ]
See “Setting up the Network Projector/Network Utility
p.51
to conduct
adjustments and settings for Network Projector.
Computer settings
Refer to your computer’s instruction manuals or wireless LAN adapter to perform the
following settings.
Select Ad hoc (for some wireless LAN adapters, this is Peer-to-Peer Group).
Set SSID (for some types of wireless LAN adapter, use Network name instead) as
the same as projector’s SSID (at factory shipment, this is set to TDPJ).
If Encryption, Network authentication, Key index and Network key are set on
the projector, set to the same values.
Note
The Easy Connect utility
p.75
allows users to easily connect the projector to
a computer over wireless networks, without making wireless LAN settings. For
Easy Connect support, the computer requires a wireless LAN environment that is
NDIS5.1 or higher driver compliant.
Refer to the user’s manual supplied with the wireless LAN adapter or the wireless
LAN embedded computer for more information.
The control setting menu
This menu sets Projector name, Email function and PJLink function, etc. Select Control
setting in step 2 in “Projector settings
p.50
. The following content will be displayed.
Item
Description
Projector
name
Specify a desired character string (0 to 16 characters).
[
or : Enter setting.] [ : Move left or right one character.] [ to
: Set a character.] [ : Confirm] [ : Select OK to end]
Press [Cancel] to return.
Email
[
: E-mail setting] [ : Select item]
Status notification: On Off
SMTP server: Enter a character string using numeric keys of the remote
control.
Port number: Enter a character string using numeric keys of the remote
control.
Destination address: Enter a character string using numeric keys of the
remote control.
Confirm: [OK
Cancel]
PJLink
[
: PJLink setting] [ : Select item]
PJLink authentication: On Off
Password: Enter a character string (1 to 32 characters) using numeric keys of
the remote control.
Confirm: [OK
Cancel]
Wireless
network
[ or : Enter setting.] [
: Select from Enabled, Disabled]
[
: Confirm
]
[ : Select OK to end]
Press [Cancel] to return.
Detailed description
[Projector name]
This can be used to identify projectors when communicating with multiple projectors, or
if there is a possibility that another person who is out of communication range will be
using the same projector. It is recommended this is set to prevent incorrect transmission.
[Email]
<Status notification>: Sends alarm information to the specified E-mail address when
an error such as lamp failure occurs.
<SMTP server>: Set an IP address of the SMTP server.
<Port number>: Enter a port number of the SMTP server.
<Destination address>: Enter within 60 characters. (Example: xxx@xxx.xxx)
[PJLink]
<PJLink authentication>: Set whether or not to authenticate the user by password
when the projector is accessed via the PJLink-compliant Software Application. (Set [On]
or [Off].)
<Password>: Enter a password for confirmation when the above <PJLink
authentication> is set to [On].
Using the menus 2 (Continued)
Downloaded from www.Manualslib.com manuals search engine
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-X200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-X200 in the language / languages: English as an attachment in your email.

The manual is 13,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info