485655
19
Zoom out
Zoom in
Previous page
1/53
Next page
36 37
Operations
Using the menus 1
You can call up on-screen menus, and conduct a number of adjustments and settings using
the MENU button
p.16
on the control panel of the main unit and remote control.
Setup using the Setting display
The menu shown below is for operation instructions purposes and might differ from the
actual display.
These marks
signify that there
are options.
Press or
to display a list of
options.
* When no item is
changed, press .
These marks signify
that there are setting
screens. Press or
to display a list of
setting screens.
Toggle items with .
Select items with and press .
Fix selection with .
This will display the Setting display menu.
1. Press the MENU button
2. Select a Category
3. Adjustments & Settings
• The figure shows displays given for operation instructions purposes. As the display may differ depending
on the item, refer to the following applicable pages for the menu item you desire.
• To return to previous item, press the RETURN button.
• When Network or USB memory input is selected, pressing the MENU button twice displays the Setting
display (2) menu.
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
Press or to open the menu.
4. End Press the MENU button once more.
(The menu will disappear automatically after 30 seconds, if no operation is conducted.)
Select a category by using
.
There are 5 categories:
Displays the current
adjustments and
settings of the selected
category.
Items shown in gray
cannot be adjusted with
the current input source.
p.37
Image adjustment menu
p.39
Display setting menu
Default setting 1 menu
p.42
Default setting 2 menu
p.43
Status display menu
p.45
The image adjustment menu
Use this menu to set or adjust image related items. Items that can be set or adjusted
are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it
indicates that you cannot select it using the current input.)
Item Description
Computer
Y/PB/PR
HDMI
Video
S-video
Network USB memory
Contrast
Adjust the image contrast.
Lo
wer
Higher
Yes Yes Yes Yes Yes Yes Yes
Brightness
Adjust the brightness of the image.
Darker Brighter
Yes Yes Yes Yes Yes Yes Yes
Color
Adjust the color of the image.
Lighter
Deeper
No Yes No Yes Yes No No
Sharpness
Adjust the sharpness of the image.
Softer Sharper
Yes No Yes Yes Yes No Yes
Noise
reduction
*1
Set the function to reduce
screen noise.
On (Enable)
Off (Disable)
No Yes No Yes Yes No No
NCE
Switches the picture mode.
Press
. Toggle the NCE
mode with
. See
p.33
for details.
Yes Yes Yes Yes Yes Yes Yes
R–level
Adjust red of the image color.
Less red
More red
Yes Yes Yes Yes Yes Yes Yes
G–level
Adjust green of the image color.
Less green More green
Yes Yes Yes Yes Yes Yes Yes
B–level
Adjust blue of the image color.
Less blue
More blue
Yes Yes Yes Yes Yes Yes Yes
NTSC
mode
*2
Set the black level with .
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
No No No Yes Yes No No
RGB input
range
*3
Set the RGB input range with
.
Standard
: When black color
becomes lighter.
Full :
When dark area
becomes too dark.
No No Yes No No No No
Auto
setting
Automatically adjusts items
such as the sampling phase
depending on the type of
input signal.
Yes No No No No No No
Equalizer Reduce noise on the screen.
Adjust with
.
No No Yes No No No No
Note
Menu adjustments and settings will not be saved, if the power cable is disconnected or
the power goes out before the adjustments and settings have been completed and the
menu display has been closed.
Downloaded from www.Manualslib.com manuals search engine
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-X200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-X200 in the language / languages: English as an attachment in your email.

The manual is 13,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info