485642
93
Zoom out
Zoom in
Previous page
1/102
Next page
93
Others
CONTENTS
Controlling the projector by using RS-232C
You can also control the projector by entering the command from a computer via RS-232C.
CONTROL RS-232C
Mini DIN 8-pin
Command list
RS-232C
9600 bps, No parity, Data length: 8 bit,
Stop bit: 1 bit
STX (02h) Command (3Byte) ETX (03h)
One command only can be used in one
communication.
Command shall be composed of
alphanumeric characters of ASCII description.
Use only capital letters.
Acknowledge ACK (06h)
Not Acknowledge NAK (15h)
Communication
method
Communication
format
Data format
Return value
1
2
3
4
Signal assignment of RS-232C
Interface format
Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
No connection
Signal
RXD
CTS
DSR
GND
RTS
N.C
TXD
N.C
Pin No.
1
2
3
4
5
6
7
8
Notes
When commands are transmitted serially, keep more than 100 ms intervals between the commands.
Adjustment commands include “ARG” (increase adjustment value) and “ALF” (decrease adjustment value). For usable items (marked “O”), send after the
selection command.
The “
O
marks in the input source columns indicate that that command can be used. *1 Not possible for PAL/SECAM. *2 Not possible for 480i mode.
7
8
6
3
4
5
12
Continued
Classification Digital RGB
Y/P
B
/P
R
Memory
Card
Document
Imaging
Camera
Analog RGB1
Analog RGB2
Video
S-video
Adjustment
Command
Selection
Command
*2
*2
*1
–OOOOOO
–OOOOOO
–OOOOOO
–OOOOOO
OOOOOOO
OOOOOOO
OO
OO
O––OO
O––OO
O––OO
––––O
––––O
PON
POF
PSD
DOF
VCN
VBR
PPH
PCK
VCL
VTN
VSH
CS0
CS1
Power On
Off (with confirmation message)
Shut Down (without confirmation message)
Normal (RS-232C Condition Display Off)
Picture Contrast
Brightness
Phase
Frequency
Color
Tint
Sharpness
Shutter 50 Hz
60 Hz
Items/Status
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-X20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-X20 in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info