485650
88
Zoom out
Zoom in
Previous page
1/102
Next page
88
Others
CONTENTS
Before calling service personal
Symptom
The power does not come on.
The power turns off while
using the projector.
No image appears.
No sound is heard.
Desired input source cannot
be selected by the INPUT
button.
RGB1 input or Y/P
B/PR input
colors are not right.
RGB2 input image does not
appear.
Digital RGB input image does
not appear.
The image is blurred.
Focusing is uneven.
The picture is dim.
Cause
The power cord is disconnected.
The lamp cover is not attached correctly.
The ambient temperature of the projection room is too high.
The lens cover is on.
The wrong input is selected.
The muting mode is on.
The “Brightness” adjustment is at its darkest.
The source is not correctly connected to the projector.
The wrong input is selected.
The muting mode is on.
The sound volume is at the minimum.
The source is not correctly connected to the projector.
Input is not set so that it can be selected with the INPUT button.
By default, only the RGB1 and video input modes can be selected.
The COMPUTER IN 1 connector’s input setting is wrong.
The COMPUTER IN 2 connector’s input setting is wrong.
The signal cable type is wrong.
The COMPUTER IN 2 connector’s input setting is wrong.
The signal cable type is wrong.
The lens is dirty.
The picture is out of focus.
The projection distance is not appropriate.
The projecting light is not hitting the screen squarely.
The “Brightness”, “Contrast”, “Sharpness” or “Phase” adjustments
are not correct.
The “Brightness” or “Contrast” adjustments are not correct.
The lamp life is ending.
Correction
Firmly plug in the power cord.
Attach the cover correctly.
Lower the ambient temperature of the projection room,
and turn the power on.
Take off the lens cover.
Select the input source correctly.
Press MUTE to restore the picture.
Make the “Brightness” adjustment.
Connect the source correctly to the projector.
Select the input source correctly.
Press MUTE to restore the sound.
Adjust the sound volume.
Connect the source correctly to the projector.
Set from the menu screen so that the source can be
selected with the INPUT button.
At the menu screen, set for the proper input signal type.
At the menu screen, set for the proper input signal type.
Use a proper signal cable.
At the menu screen, set for the proper input signal type.
Use a proper signal cable.
Clean the lens with a blower or lens cleaner, etc.
Focus the picture.
Adjust the distance properly.
Adjust the projecting direction so that the light hits the
screen squarely.
Make the “Picture” adjustments.
Make the “Picture” adjustments.
Replace the lamp.
Page
19
87
82
19
29
34
48
22
29
34
12
22
48
48
48
23
48
23
85
30
18
18
54
54
86
Check the following points before asking for support service. Refer also to “Trouble indications”.
82
Continued
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-X10U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-X10U in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info