215803
18
Zoom out
Zoom in
Previous page
1/29
Next page
34 35
Operations
Using the menus
You can call up on-screen menus, and conduct a number of adjustments and settings using
the MENU button
p.16
on the control panel (main unit side) and remote control.
Setup using the Setting display
The menu shown below is for operation instructions purposes and might differ from the
actual display.
These marks
signify that there
are options.
Press or
to display a list of
options.
* When no item is
changed, press .
These marks signify
that there are setting
screens. Press or
to display a list of
setting screens.
Toggle items with .
Select items with and press .
Fix selection with .
Display the Setting display menu.
1. Press the MENU button
2. Select a Category
3. Adjustments & Settings
The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
refer to the following applicable pages for the menu item you desire.
To return to previous item, press the RETURN button.
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
Press or to open the menu.
4. End Press the MENU button once more.
(The menu will disappear automatically after 30 seconds, if no operation is conducted.)
Select a category by using
.
There are following 5 categories:
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
p.35
Image adjustment menu
p.37
Display setting menu
Default setting 1 menu
p.40
Default setting 2 menu
p.41
Status display menu
p.42
The image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted
are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it
indicates that you cannot select for the current input.)
Item Description
Computer
Y/PB/PR Video S-video
Contrast
Adjust the image contrast.
Lower
Higher
Yes Yes Yes Yes
Brightness
Adjust the brightness of the image.
Darker
Brighter
Yes Yes Yes Yes
Color
Adjust the color of the image.
Lighter
Deeper
No Yes Yes Yes
Sharpness
Adjust the sharpness of the image.
Softer
Sharper
Yes Yes Yes Yes
Noise
reduction
*1
Set the function to reduce screen noise.
On (Enable)
Off (Disable)
No Yes Yes Yes
Picture
mode
Press . Toggle the picture mode
with . 1/2/3
Yes Yes Yes Yes
R-level
Adjust red of the image color.
Less red
More red
Yes Yes Yes Yes
G-level
Adjust green of the image color.
Less green
More green
Yes Yes Yes Yes
B-level
Adjust blue of the image color.
Less blue
More blue
Yes Yes Yes Yes
NTSC mode
*2
Set the black level with .
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
No No Yes Yes
Auto setting
Automatically adjusts items such as
the sampling phase depending on the
type of input signal.
Yes No No No
Position
Press then change mode using
and adjust with
Yes No No No
Phase
Adjust to eliminate flicker.
Yes No No No
Frequency
Adjust to eliminate periodic patterns
and flickering when many fine vertical
lines appear on the screen.
Yes No No No
H-position
Adjust the horizontal position of the
image.
Yes No No No
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tlp x100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tlp x100 in the language / languages: English as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba tlp x100

Toshiba tlp x100 User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info