485652
47
Zoom out
Zoom in
Previous page
1/53
Next page
92 93
Maintenance
5
Pull out the lamp.
Loosen the 3 lamp locking screws, pull up the
handle, and press the tab to remove the lamp.
6
Mount the new lamp.
Align the orientation, press down the new lamp
until the bottom is reached. Then lock it in
place using the 3 lamp loc
king screws.
Tab
Notes and Precautions
The [Lamp time] item in the Status display menu indicates the time of lamp use. (Use
it as a rough estimate or guide for lamp life.)
p.45
Please replace the lamp after 2000 hours of use if [Lamp power] in the Default setting
1 menu is set to [Standard], or after 3000 hours of use if [Lamp power] in the Default
setting 1 menu is set to [Low].
p.42
There may be cases where the lamp stops working before the above mentioned period
expires or before the replacement message is displayed.
Attach the outer lamp cover correctly so that it is secure and not loose. If it is not
attached correctly, the projector may fail to turn on or the lamp may fail to come on.
Always replace the lamp with a new one.
The lamp is made out of glass. Do not touch the glass surface with your bare hands, bang
it, or scratch it. Since dirt, jolts, scratches and other similar particles may affect the lamp.
About lamp replacement messages
The lamp replacement message displays an appropriate period based on the
use period selected in [Lamp power].
When the replacement time approaches, “The lamp life is ending. Please
change the lamp. message is displayed each time the power is turned on. The
display disappears when you press the
button.
Used Lamps
This projector’s lamp contains trace amounts of environmentally harmful inorganic
mercury. Be careful not to break used lamps, and dispose of them in accordance with
local regulations.
Lamp replacement (Continued)
7
Replace the inner lamp cover.
Replace and tighten the screws removed in step
4
until
the inner lamp cover is secure.
8
Replace the outer lamp cover.
Align the cover and slide in the direction of the arrow,
then tighten the screw loosened in step
3
until the
outer lamp cover is secure. Always replace the outer
lamp cover.
9
Reset the lamp time.
See the lamp’s manual for instructions on resetting
the lamp time.
Outer lamp cover
Inner lamp cover
1
Unplug power cord.
2
Wait until lamp is sufficiently cooled.
Wait for at least 1 hour.
3
Remove the outer lamp cover.
Loosen the screw attached on the side of the
outer lamp cover. Remove the cover by sliding it
in the direction of the arrow.
4
Remove the inner lamp cover.
Remove the screws and carefully set them aside,
and remove the inner lamp cover. Be sure not to
loose the screws.
Inner lamp cover
Outer lamp cover
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-WX200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-WX200 in the language / languages: English as an attachment in your email.

The manual is 13,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info