485570
18
Zoom out
Zoom in
Previous page
1/26
Next page
35
Operations
34
Preparation of the document camera (when loading the camera)
PRECAUTIONS
Do not jolt or force the camera head or camera arm. Doing so could cause malfunction.
Note that when extending or rotating the camera arm, the arm moves in an arc. Take care
not to bump yourself or others with it.
Preparing the document camera (for use being separated
from the projector)
Before connecting the camera cable, make sure that the projector power is off.
PRECAUTIONS
Insert a camera cable straight and securely until it locks. When disconnecting the cable,
pull it out releasing the lock on both sides of the plug.
Be sure to pull the tip resistant bar fully until it forms the angle of 90 degree. If you dont
use the bar, the camera may topple over.
Note that the camera may tip over if you attempt to rotate the arm in the opposite side of
the tip resistant bar.
For camera interconnection, be sure to use the supplied camera cable (1 m). If you use
the other cables, the normal operation cannot be achieved and even the malfunction may
result.
Note
Connecting or disconnecting the camera cable with the projector's power ON may cause
camera error (
is displayed) and even turn off the power.
Status before preparation
(When stowed)
1) Set up arm 2) Extend arm
3) Rotate arm 4) Raise camera head
1) Connect the supplied
camera cable to the
camera input terminal.
2) Connect the other end of
the camera cable to the
camera terminal on the
document camera.
3)
Pull out the tip resistant bar
and set up the document
camera
.
Using the document camera
Please read this chapter if the model you purchased includes a document camera.
Uninstalling the camera
Installing the camera
PRECAUTIONS
Before mounting or dismounting the document camera, disconnect the power plug.
Place a soft cloth beneath the projector when mounting or dismounting the camera.
Do not dismount or mount the document camera while the projector is upright or kept in the air
.
Before mounting the camera, confirm that the interconnection connector is closed with
the connect lever. If you attempt to mount the camera with the connector being protruded,
connector may be damaged.
When mounting the camera, be sure to slide the document camera until it is locked with
click sound.
Confirm the four registration stays are aligned before sliding the camera.
1)
Place the folded document
camera with the bottom
side up.
2) Slide the connect lever in
the direction of an arrow.
3) Pressing the lock lever in
the direction of an arrow,
slide the document
camera.
1)
Place the folded document
camera with the bottom
side up.
2) Align the four registration
marks.
3) Slide the document
camera in the direction of
an arrow until it clicks.
4) Slide the connect lever in
the direction of an arrow.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-T61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-T61 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info