485567
17
Zoom out
Zoom in
Previous page
1/26
Next page
33
Operations
32
The display setting menu
Use this menu to set screen display-related items.
(Full): Display with LCD panels resolution
(Thru): Display with sampling resolution (for computer input)
(Wide): Wide-screen display (for Video, S-video, and Y/P
B
/P
R
)
Select one of the languages below to use for displaying menus and messages
[ : Enter setting mode] [ :Selection] [Apply: ]
English/Français/Deutsch/Italiano/Español/
Português/ / / /
Screen to display when there is no input signal
(Logo) (Blue) (None)
Display icons as function guides On Off
Display start-up screen when power turned on On Off
Description
Item
Screen size
Language
Background
Icon
Start-up screen
Notes
If Thru is selected for screen size, portions exceeding the pixel count of the LCD panel
p.45
will not appear on the screen. Note that for RGB signals with clock speeds
SXGA3_60
p.46
or lower, all input pixel signals are sampled. (This effect is noticeable
when the screen is enlarged using the Resize function
p.29
). However, if the clock speed
is higher than this, the RGB pixel signal is reduced before sampling.
Displaying the images with the aspect ratio different from the original with the purpose of
other than the personal and private viewing, using the screen size menu may violate the
copyright protected by the law.
Reset menu (Special menu)
When other menus are not displayed and the button is held down, the menu appears.
When the screen is placed vertically, and Auto keystone correction is executed, but the
keystone correction is not successful, stow the foot adjuster in its original position, place
the projector on a flat surface, select Horizontal reference value reset, and press the
button.
Select Reset All and press the
button to return all menu items to the factory settings.
Reset the horizontal reference value for Auto keystone correction
[ : Enter execution mode] [Yes No] [Apply: ]
Reset all menu items to their factory settings
[ : Enter execution mode] [Yes No] [Apply: ]
DescriptionItem
Horizontal reference
value reset
Reset all
Using the menu (Continued)
The image adjustment menu
Use this menu to adjust image-related items.
Items that can be adjusted are marked with Ye s , and those that cannot are marked with No.
Item Description
Computer
Y/PB/PR Video S-video
Camera
Contrast
Lower Higher
Yes Yes Yes Yes Yes
Brightness
Darker Brighter
Yes Yes Yes Yes Yes
Color
Lighter Deeper
N o Ye s Ye s Ye s No
Tint
[Note 1]
Reddish Greenish
No No Yes Yes No
Sharpness
Softer Sharper
N o Ye s Ye s Ye s Ye s
R-level
Less red More red
Yes Yes Yes Yes Yes
G-level
Less green More green
Yes Yes Yes Yes Yes
B-level
Less blue More blue
Yes Yes Yes Yes Yes
Up/down shift
[Note 2]
Shift down Shift up
N o Ye s Ye s Ye s No
Notes
1: Tint can only be adjusted when Video mode
p.26
is set to NTSC or NTSC4.43.
2: Up/down shift can only be adjusted when Screen size
p.33
is set Wide.
The default setting menu
This menu shows placement status and other settings.
Sets projection mode in accordance with Placement Style
Sets the period of time to wait until turning off the power after signal input stops:
Off (not turned off) 1 min 2 min ... 60 min
Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the power cord is plugged in (Auto). Manual Auto
Sets the lamp power Standard Low
Sets the cameras shutter speed to either (50Hz) or (60Hz).
50Hz 60Hz.
Sets the cameras white balance to (Auto) or (Fixed).
Auto Fixed.
Description
Item
Projection
mode
No signal
power off
Power on
Lamp power
[Note 1]
Shutter speed
White balance
[Note 2]
(Back hung
from ceiling)
(Placed
on floor)
(Rear)
(Hung from
ceiling)
p.19
Notes
1: When lamp power is set to low, the screen becomes a little darker, but the cooling fan noise gets
quieter. This setting will be cleared when you turn the power off. The setting will be back to
Standard when the power is turned on next time.
2: White balance, if set to Fixed, is reset upon power off and the Auto is resumed the next time the
unit is turned on. (Models with the document camera)
Notes
Note that if Power on is set to Auto, then if the power cord is plugged in when power is
restored after a power outage, the projector power will come on.
Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power.
Unplugging the power cord to cut off the power will shorten the life of the lamp.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-S41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-S41 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info