485563
9
Zoom out
Zoom in
Previous page
1/22
Next page
1716
Preparations
Operating the remote
control
Point the remote control toward the
projectors infrared remote sensor,
and press a button on the remote
control.
Operating the projector from the front
Approx. 15°
Approx. 5m
Operating the projector from the rear
Approx. 15°
Approx. 5m
Loading dry-cell batteries
into the remote control
q Remove the battery cover.
w Insert the dry-cell batteries.
Be sure to align the plus and minus
ends of the batteries properly.
Two batteries (R03, SIZE AAA) are
used.
e Replace the battery cover.
Dry-cell batteries
Before using the batteries, be sure to observe the Safety Precautions described in
previous pages.
Remove batteries from remote control when not using for extended periods.
If the remote control stops working, or if its range decreases, replace all the batteries with
new ones.
The remote control
The remote control may fail to operate if the infrared remote sensor is exposed to bright
sunlight or fluorescent lighting.
Do not drop or bang.
Do not leave in hot or humid locations.
Do not get wet or place on top of wet objects.
Do not take apart.
In rare cases, ambient conditions could impede the operation of the remote control. If this
happens, point the remote control at the main unit again, and repeat the operation.
Preparing and using the remote control
Names of each part on the control panel and remote control
Control panel
FAN
TEMP
LAMP
ON
VOL.
+
VOL.
-
(1)(2)
(3) (4)
(5)
(6)
(7) (8) (9) (10)
ON / STANDBYINPUT
MENU
AUTO SET
KEYSTONE
ZOOM
+
ZOOM.
-
INPUT
ON/
STANDBY
CANCEL
CALL
MUTE
RESIZE
FREEZE
AUTOSET
KEYSTONE
MENU VOL.
+
VOL.
-
ZOOM
+
ZOOM
-
(1)
(2)
(3)
(4)
(5)
(6)
(12)
(13)
(14)
(11)
(15)
Remote control transmitter
Remote Control
Note
For the remainder of this manual, buttons are referred to as follows:
Selection buttons
; MENU button
CLASS 1 LED PRODUCT
Name : Main Function
(1) ON/STANDBY button : Turns the power on/off (standby).
p.20
(2) INPUT button : Selects input.
p.22
(3) KEYSTONE button : Adjusts keystone (trapezoidal distortion).
p.25
(4) AUTO SET button : Sets up image and mode.
p.24
(5) MENU button : Displays menus and makes selections.
p.29
(6) Selection buttons : Menu selections and adjustments, etc.
p.29
(7) FAN indicator : Displays cooling fan mode.
p.23
p.35
(8) TEMP indicator : Lights when internal temperature too high.
p.35
(9) LAMP indicator : Displays lamp mode.
p.21
(
10
) ON indicator : Displays whether power is on or off.
p.20
(
11
) MUTE button : Cuts off the picture and sound temporarily.
p.26
(
12
) FREEZE button : Pauses image.
p.26
(
13
) RESIZE buttons : Enlarges picture size.
p.27
(
14
) CANCEL button : Exiting the operation.
p.28
(
15
) CALL button : Displays the information on the screen.
p.28
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TLP-S10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TLP-S10 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info