214695
27
Zoom out
Zoom in
Previous page
1/43
Next page
27
Adjustments
Projection adjustments
– Image
Preparation
Display the image as explained in “Picture
Projection”.
19
Notes
When performing the automatic projection
adjustment, use a bright and distinctly edged
picture.
Pressing AUTO SET on the remote control
can also adjust the image automatically.
21
If you project an image from a computer with
an LCD screen while monitoring the image on
the computer, the image may not be projected
properly, depending on the computer model.
In this case, turn off the computer display, or
make the necessary picture adjustments on
the projector. For details on controlling the
computer display, etc., refer to the computer’s
manual and description on the software for
the computer used.
During adjustments of “H-position” or “V-
position”, the image may not be projected
properly.
While using, an aberration of the phase may
occur. In that case, adjust “Phase” again.
Some item may be displayed in gray
depending on an input source. The item
displayed in gray cannot be adjusted and/or
set.
These adjustments are stored until you turn
the power off.
To store the adjustments even if the power is
turned off, follow the procedure of “Saving
data”.
30
Pressing RESET will return the adjustment or
setting currently selected to default.
RESET
ON/STANDBY MENU ENTER
SELECT/ADJUST
INPUT
ON
LAMP
TEMP
4
AUTO SET
1,7
2,3,5,6
VIDEORGB
AUTO SET
KEYSTONE
RESIZE
FREEZE
MENU
RESET
+-
ENTER
MUTE MARKER
CALL
ON/
STANDBY
Auto syn
Image
c.
Phase
+
H–pos i t i on
V–pos i t i on
Clock
+
+
+
1
2
3
4
5
6
7
Press MENU to display the
menu.
Press or to select .
Press to select “Auto sync.
Press ENTER.
The image is automatically adjusted.
For further adjustments, follow the below
steps.
Press or to select a
preferred item.
Press or to adjust the
item.
To select another item, go back to step 5.
Phase: To reduce flickers.
H-position: To shift the image to the
left (–), to the right (+).
V-position:
To shift the image down (–),
to up (+).
Clock To remove vertical stripes.
Press MENU.
The menu disappears.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tlp mt3 home cinema projector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tlp mt3 home cinema projector in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info