•Never give shocks or impacts to the camera or arm as this may cause malfunction.
•While raising up or turning the arm, the arm moves describing an arc, be careful not to hit your face or your body.
•The figures above are procedures of putting materials on the projector. When the stability of materials is required or the light of the indicator is visible
through the materials, place the materials at the back of the projector and set the arm and camera head over them.
Preparation of the document imaging camera
1) Raise up the arm.
Before preparations
(stowed away)
2) Extend the arm.3) Turn the arm.
4) Open the camera head.5) Turn the camera head.6) Pull up the light.7) Turn the light.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Toshiba tlp 790 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Toshiba tlp 790 in the language / languages: English as an attachment in your email.
The manual is 2,72 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.