Return the settings of FULL MENU [Default setting] to the factory default values.
The projector is set to the floor-mounted front projection mode.
The projector is set to the floor-mounted rear projection mode.
The projector is set to the ceiling-mounted front projection mode.
The projector is set to the ceiling-mounted rear projection mode.
The TOSHIBA logo is displayed when no signal is input.
The entire screen is set to blue when no signal is input.
Nothing is displayed when no signal is input.
The power does not turn off automatically even if no signal status continues.
The power turns off automatically when no signal status continues for approx. 5 min.
: COMPUTER IN connector is selectable with the INPUT button.
: Video input is selectable with the INPUT button.
: Use COMPUTER IN connector as Analog RGB input.
: Use COMPUTER IN connector as Y/PB/PR input.
: S-Video input is selectable with the INPUT button.
: Camera input is selectable with the INPUT button.
The power turns on by pressing the ON/STANDBY button.
When the power plug is inserted, the power is on.
The start-up display appears when the power is turned on.
The start-up display does not appear when the power is turned on.
VIDEOSET
Input source setting
SETCOMPUTER
SETAnalog RGB
SETY/PB/PR
S-VIDEOSET
CAMERASET
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Y/PB/PR
Video
The relationship between input source and item Yes: Adjustable -: Not displayed
S-VideoCamera
Analog RGB
Reset
EXEC.
Projection modeStandardSET
RearSET
CeilingSET
Rear ceilingSET
Background
LogoSET
BlueSET
NoneSET
No signal power off
OffSET
5 min.SET
Power onManualSET
Auto.SET
Start-up screenOnSET
OffSET
: On/Off with ENTER
: On/Off with ( ) or ()
You can set the Input source, projection mode, etc. from FULL MENU [Default setting].
To operate FULL MENU, refer to page
44
.
Notes
•It is impossible to exit from the menu if no input source is selected.
•If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.
•In the following conditions, the function to detect no signal (“No signal background”, “No signal power off”) does not activate:
1) When “Video mode”
46
is set to the modes other than [Auto] and Video input or S-Video input is selected.
2) When “Signal format”
46
is set to the modes other than [Auto] and Y/PB/PR input is selected.
•Note that the projector automatically powers up at the restoration of power after a failure, if “Power on” is set to [Auto] with the power plug inserted.
•Even if “Power on” is set to [Auto], the setting of [5 min.] of “No signal power off” is effective.
•Each item can be set at all input sources, but the settings made at one input source are applied in common to all input sources.
•The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-plugged or if
a power failure occurs while the projector is on, the settings are not memorized.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Toshiba tlp 261 with document camera at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Toshiba tlp 261 with document camera in the language / languages: English as an attachment in your email.
The manual is 2,28 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
