627007

Toshiba TEC MA-1595-1 SERIES Manual

212
Zoom out
Zoom in
Previous page
1/236
Next page
5. PROGRAMMING OPERATIONS
EO1-11152
5.2 Programming Operations Added for In-line Terminals
5- 2
5.2 Programming Operations Added for In-line Terminals
5.2.1 Terminal Connection Table Setting (Submode 69)
This submode is required for In-line services. The In-line ID No., Register No. and IP Address of each terminal
(including the Master Terminal) can be programmed here.
Any time outside a sale
Mode Lock:
SET
and IN-LINE Lamp illuminated
69
[@/FOR]
|In-line ID No.
|
[ST]
|Store/Register No.|
[#]
|IP Address|
[#]
[AT/TL]
NOTES: 1. In-line ID No.: Master Terminal ... 01 (fixed)
Backup Master Terminal (if connected) ... 02 (fixed)
Satellite Terminals ... 03 to 16 (max. 14 terminals)
2. The In-line ID No. and Register No. of each terminal to be set here must be the same as those
programmed for the terminal in IN-LINE TERMINAL ID SETTING (Submode 77) in this chapter
and STORE/REGISTER NO. SETTING (no submode) in Chapter 6 of the Programming Manual
for stand-alone level.
3. IP Address: 12 digits (000.. 000 to 255.. 255)
ex) To set the IP Address 192.168.0.252……….Enter 192168000252
4. To delete an individual terminal from the Terminal Connection Table, enter 0 in place of the In-
line ID No., then enter Register No..
69
[@/FOR]
0
[ST]
|Store/Register No.|
[#]
[AT/TL]
5. To delete the entire Terminal Connection Table once set, operate:
69
[@/FOR]
0
[AT/TL]
6. If a deleting operation (individual or entire deletion) is performed, the files occupied by the
deleted terminal(s) (such as Floating Cashier File, etc.) is canceled. Therefore, a deleting
operation should be performed only when the system is to be re-built or a terminal is to be
detached from the system.
Example)
To set Master Terminal and Satellite Terminal in the Connection
Table (total of two terminals in the in-line system):
Master Terminal In-line ID No. 1 Register No. 111101 IP Address 192.168.0.251
Satellite Terminal In-line ID No. 3 Register No. 333303 IP Address 192.168.0.253
Key Operation:
Mode Lock
SET
and IN-LINE Lamp illuminated,
enter 69, depress
[@/FOR]
.
01
[ST]
(Master In-line ID No.)
111101
[#]
(Master Register No.)
192168000251
[#]
(Master IP Address)
03
[ST]
(Satellite In-line ID No.)
333303
[#]
(Satellite Register No.)
192168000253
[#]
(Satellite IP Address)
[AT/TL]
(Complete this Submode)
OPERATION
CONDITION
2 digits (01 to 16)
(
NOTES 1
&
2
below)
Max. 6 digits
0 to 999999
(
NOTE 2
below)
12 digits
(
NOTE 3
below)
* For sequentially
programming In-
line ID Nos, the In-
line ID specification
can be skipped.
*
Repeat for other terminals to be connected
,
includin
g
the Master Terminal itself.
(
Max. 16 terminals
)
… 212 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TEC MA-1595-1 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TEC MA-1595-1 SERIES in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info