627008
8
Zoom out
Zoom in
Previous page
1/33
Next page
2. MAIN UNIT REPLACEMENT
EO18-11004A
2.2 Note for Attaching the Top Cover Ass’y
2- 3
2.2 Note for Attaching the Top Cover Ass’y
When attaching the Top Cover Ass’y, fit the six hooks into the Bottom Cover, and then attach the Top
Cover. At this time, be careful not to catch any cables between the Top Cover and the Bottom Cover.
2.3 Replacing the MAIN PC Board Ass’y
CAUTION!
1. When you replace the MAIN PC Board, all programmed data and sales data will be cleared.
2. After replacing the MAIN PC Board, plug the power cord to charge the machine for 48 hours or
more and then perform a RAM clear, resulting that the ECR performs normally.
1) Remove the Top Cover Ass’y. (Refer to Section 2.1 Removing the Top Cover Ass’y.)
2) Disconnect the fourteen cables from the MAIN PC Board as shown below.
CN2 (2 pins) from the Li-Battery CN401 (7 pins) from the Transformer
CN7 (2 pins) from the Drawer Sensor CN501 (12 pins) from the Receipt Printer Motor, Sensor
CN12 (6 pins) from RS-232C #1 CN502 (12 pins) from the Journal Printer Motor, Sensor
CN14 (5 pins) from RS-232C #2 CN503 (4 pins) from the Auto Cutter
CN15 (5 pins) from RS-232C #3 CN504 (3 pins) from the Winding Motor
CN16 (3 pins) from the Drawer Solenoid CN505 (14 pins) from the Receipt Printer Head
CN9 (7 pins) from the Binary Lock (FS-1535 only) CN506 (14 pins) from the Journal Printer Head
TP-4x10
TP-4x10
Top Cover Ass’y
Bottom Cover
Top Cover
Hook
Bottom Cover
U25
ROM
U24
U26
RAM
RAM
CN8
CN17
CN11
Keyboard-1
Keyboard-2
Control Lock
U19
CPU
U14
Gate Array
CN2
Li-Battery
CN13
Expansion Memory
CN10
FIU PC Board
CN401
Transformer
CN9
Binary Lock
(FS-1535 only)
CN12
CN14
CN15
RS-232C #1
RS-232C #2
RS-232C #3
Drawer Sensor
CN16
Drawer
Buzzer
Receipt Printer
Motor Sensor
Receipt Printer
Head
Journal Printer
Head
Journal Printer
Motor Sensor
CN5 (not used)
Winding
Motor
Auto
Cutter
CN6 (not used)
CN504
CN503
CN505
CN501 CN502
CN506
CN7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TEC MA-1535 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TEC MA-1535 SERIES in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info