485290

Toshiba TEC MA-1350 Manual

63
Zoom out
Zoom in
Previous page
1/114
Next page
- 56 -
EO1-11126
MA-1350-1 SERIES
Some segment is not displayed, display shimmers, or illumination of the display is
uneven.
Cause 1: Failure of the LED
Measure: Ask the store where purchased.
6. Trouble during Normal Operations
NOTE on changing the Control Lock position:
Changing the Control Lock position during sales entries or programming causes an error. To clear the error,
return the Control Lock to the original position. However, changing the Control Lock position to the OFF does
not cause an error. Error caused by changing the Control Lock position cannot be cleared by the [C] key.
Normal operations cannot be carried out.
Cause 1: Control Lock position does not correspond to the operation you attempted.
Measure: Check whether or not the Control Lock position corresponds to the operation. (Especially, check
whether or not the operation you attempted requires the MGR position. Ask your manager about
the operations which requires the MGR position.)
Error tone beeps
Cause 1: Operation procedure is incorrect.
Measure: Depress the [C] key to clear the error, then check the operation procedure you attempted.
Cause 2: Control Lock position is incorrect.
Measure: Turn the Control Lock to the correct position using the Control Key.
Cause 3: Operation in the REG position was attempted while the drawer remained open. (In case that the
Drawer-close Compulsory Option has been selected.)
Measure: Close the drawer, then depress the [C] key.
7. Trouble in the REG Position
Operations in the REG position cannot be carried out.
Cause 1: Control Lock is not in the REG position.
Measure: Turn the Control Lock to the REG position using the Control Key.
Cause 2: Cashier Identifying Operation was not performed when the Cashier Identifying Option has been
selected.
Measure: Perform the sign-ON or set the Cashier Key ON. (Refer to page 17.)
Cause 3: Operation was attempted while the drawer remained open. (In case that the Drawer-close
Compulsory Option has been selected.)
Measure: Close the drawer, then depress the [C] key.
Cause 4: Operation you attempted requires the MGR position.
Measure: Depress the [C] key, and ask your manager whether the operation requires the MGR position. If
required, ask your manager to turn the Control Lock to the MGR position.
Cause 5: You ignored the validation print when the Validation Compulsory Option has been selected to the
last operation you attempted. (In this case, the status lamp “SLP” flickers.)
Measure: Depress the [C] key, and perform the validation print.
Cause 6: After performing the validation print, you attempted the next operation while the validation slip
remained in the validation slot.
Measure: Depress the [C] key, and pull out the validation slip from the validation slot.
… 63 …


Need help? Post your question in this forum.

Forumrules
1

Forum

toshiba-tec-ma-1350

Reset search

  • What are the codes for clearing department key on a tec ma 1350 cash register Submitted on 14-10-2022 at 23:44

    Reply Report abuse

  • Is it possible to print a receipt without finalizing a sale Submitted on 29-10-2021 at 18:02

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TEC MA-1350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TEC MA-1350 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba TEC MA-1350

Toshiba TEC MA-1350 User Manual - Dutch - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info