626994

Toshiba TEC FS-2600-1 SERIES Manual

201
Zoom out
Zoom in
Previous page
1/210
Next page
7. BACKUP FUNCTION
EO1-11138
7-2
(2) Procedure
1) Changing Program Data (DLL from the PC)
7. BACKUP FUNCTION
PC
BM
DLL data
Response Response
Backup data
M
• When various center files from the PC are received via DLL, the master terminal (M) backs up program
data and sales data of the backup master terminal (BM) automatically and sends the result to the PC.
2) Changing Program Data (Operated on the Master Terminal)
M
Programming
Operation
• When various center files are being programmed on the master terminal (M) , the backup error flag of
the relevant file is turned on. (At this time, backup data is not updated.)
* For details about the backup error flag, refer to 5) Backup Error Flag.
* For an explanation of the backup data update process, refer to 6) Backup Data Update Process.
3) Updating Sales Data
• After each satellite terminal sends an affect data of which sales data is subject to the data backup to the
master terminal, the same data is sent to the backup master terminal and the sales data is updated.
4) Checking Backup Data
BM
Version data
Version request
M
• The master terminal (M) sends the version request command to the backup master terminal (BM) every
certain period of time and receives version information about the backup data.
• The master terminal (M) checks correspondence between the version information received from the
backup master terminal (BM) and the center files (stored in the M) . If an abnormality is found, the
backup error flag is turned on.
• When a master job is being performed on the master terminal (M) ([RTR] key turned on), or a PC job is
being performed backup data is not checked.
5) Backup Error Flag
• When there is any difference between the data stored in the master terminal (M) and the backup data
stored in the backup master terminal (BM), the master terminal (M) turns on the backup error flag of the
file in which a difference was found.
• There are the following five cases when the backup error flag is turned on.
1 The master terminal (M) changes the programming of the center files.
2 A version error is found at the backup data check.
3 The backup job fails after the center file has been downloaded from the PC.
4 Updating of the backup data fails after the center files have been reset.
5 Updating of the backup data fails after the center file (containing Read counter) has been read.
6 The backup master terminal (ID No. 2) is added to the terminal connection table.
… 201 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TEC FS-2600-1 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TEC FS-2600-1 SERIES in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info