627009
10
Zoom out
Zoom in
Previous page
1/33
Next page
2. MAIN UNIT REPLACEMENT
EO18-11004A
2.4 Replacing the Power Supply Block
2- 5
2.4 Replacing the Power Supply Block
1) Remove the Top Cover Ass’y. (Refer to Section 2.1 Removing the Top Cover Ass’y.)
2) Remove the Transformer Cable from CN401 on the MAIN PC Board, and then remove the Fuse
Cover and the Fuse from the Fuse Holder.
3) Remove the two TP-4x12 screws from the Transformer, the TP-3x8 screw from the Fuse Holder,
and the two TP-3x8 screws from the Set Piece which fixes the Power Cord onto the Bottom Cover,
respectively.
4) Replace the Power Supply Block with the new one, and then reassemble in the reverse order of
removal.
2.5 Replacing the RIU Unit
1) Remove the Top Cover Ass’y. (Refer to Section 2.1 Removing the Top Cover Ass’y.)
2) Remove the RIU Cable from CN2 and CN3 on the FIU PC Board, and then remove the RIU Unit
from the Top Cover.
3) Replace the RIU Unit with the new one, and then reassemble in the reverse order of removal.
4) Make Display Test in Diagnostic Test to check the performance. (See Section 4.2 Display Test.)
TP-4x12
Power Cord
TP-4x8
TP-3x8
Set Piece
Fuse Holder
Transformer Cable
Fuse Cover
TP-3x8
Fuse
CN401
RIU Cable
FIU PC Board
CN2
CN3
RIU Unit
Top Cover
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TEC FS-1535 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TEC FS-1535 SERIES in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info